Overview
The G2 Axle and Gear 25-2025 is a minor ring and pinion installation kit for the AMC 20 front and rear axle.
For AMC 20 axles at either end, G2 offers the 25-2025. The kit contains a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound, and no bearings.
The 25-2025 fits the AMC 20 axle in either the front or rear position. It includes a proper shim kit, a nut, crush sleeve and seal, ring gear bolts, silicone sealer, Loctite and gear marking compound. An installer wanting bearings in the box would look to the master kit, 35-2025. Confirm the housing position before ordering, since the kit covers both.
Key features
- Minor kit for the AMC 20 axle (front and rear)
- Meant for jobs that keep the existing bearings
- Shim kit for setting pinion depth and carrier position
- Pinion nut, crush sleeve and pinion seal
- Ring gear bolts and silicone sealer
- Loctite and gear marking compound
Front versus rear AMC 20 work
The AMC 20 is used at both ends of some vehicles, and the front and rear housings can differ in how they are set up. Before starting, confirm which position you have and whether the carrier and pinion match that position. A kit that fits one housing will not help if the carrier is from the other end.
Front axles often see more steering load and more water exposure, so inspect the seals and carrier bearings closely at teardown. Rear housings may show more heat from driving torque. Either way, shim changes should be made in small steps and checked against the marking pattern each time.
- Confirm front or rear position first
- Inspect seals and carrier bearings at teardown
- Check the carrier before reusing it
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2025 |
| UPC | 631410094985 |
| Kit type | Minor kit |
| Axle location | Front and Rear |
| Axle type | AMC 20 |
| Axle manufacturer | AMC |
| Manufacturer part number | G/225-2025 |
Vehicle fitment
It fits the AMC 20 axle in front or rear positions. Confirm your axle type and year before ordering.
Confirm your vehicle’s axle type and year before ordering.
Installation notes
With the bearings staying, inspect the races and the carrier. Use the shims to set depth and then the compound to verify tooth contact.
Before starting the 25-2025 job on the AMC 20 axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2025 are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.
What’s included
- Proper shim kit
- Pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite thread locker
- Gear marking compound
Not included: bearings and gears; the 25-2025 is a minor kit for the AMC 20 axle.







