Overview
The G2 Axle and Gear Dana 30 master ring and pinion install kit, part number 35-2032A, is a gear kit for the Dana 30 axle. It comes with a factory ring and pinion.
Dana 30 names the axle rather than a vehicle, so the axle has to be identified on your own vehicle before the kit is chosen. The gear set and installation kit work together, so keep the part number G/235-2032A with your records.
Gear set basics
A Dana 30 gear set has to be matched to the axle housing, the carrier and the pinion depth. Before work starts, confirm the axle identity on your vehicle and check the carrier for wear. Shim packs and bearing preload are set during the build, so keep the old shims and note their sizes when the axle is opened.
Once the gears are in, the setup needs careful checks. Backlash and tooth contact should be confirmed before the axle goes back under the vehicle. Expect a break-in period with moderate loads and frequent checks for heat, whine or leaks. Fresh gear oil is usually part of a complete gear job, so plan for it at the end.
- Confirm axle identity before ordering
- Keep old shims and note their sizes
- Check backlash and tooth contact before reinstalling
- Plan for fresh gear oil after setup
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/235-2032A (title: 35-2032A) |
| Product type | Master ring and pinion install kit |
| Axle | Dana 30 |
| Included per title | Factory ring and pinion |
Vehicle fitment
Dana 30 names the axle rather than a vehicle, so match the axle and year on your vehicle to the kit before ordering. Check the fit against your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear set setup, such as pinion depth and backlash checks, calls for a professional, and the new gears need a break-in run once installed.
What’s included
A factory ring and pinion is included. Check any remaining pieces against your installation before starting the gear setup.





