Overview
The Fox Racing Shox 2.0 Performance Series Smooth Body IFP Bushing Mount Steering Stabilizer, part 985-24-063, is a bushing mount steering stabilizer. It measures 23.95 in extended and 15.85 in collapsed.
The stabilizer is sold on its own, so brackets and the shock boot are not included.
Key features
- Smooth body design with an IFP bushing mount
- Extends to 23.95 in and collapses to 15.85 in
- 2.0 Performance Series, single unit
- Stabilizer only, without brackets or shock boot
Steering stabilizer basics
A steering stabilizer damps the side-to-side movement of the front axle, so bumps and wheel shimmy are less likely to reach the steering wheel. Its bushing mount takes a share of the load at each end, and the bushings are often the first part to wear as miles add up.
When a stabilizer is replaced, look at the bushings, the bracket bolts and the tie rod ends at the same time. Loose bushings allow the stabilizer to knock, while a worn tie rod end can feel like a stabilizer problem. Check for play by hand with the wheels on the ground and the steering wheel centered. Larger tires and lift components change the geometry the stabilizer works against, so review the setup after any change to wheel size or height.
- Inspect the bushings for cracking or oil contamination
- Check the bracket bolts for proper tightness
- Recheck the stabilizer after the first few drives
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-063 |
| UPC | 70000666505 |
| Series | 2.0 Performance Series |
| Mount type | IFP bushing mount, smooth body |
| Length extended | 23.95 in |
| Length collapsed | 15.85 in |
| Listed size | 2.0 x 8.0 |
| Quantity | Single |
| Brackets included | No |
| Shock boot included | No |
Vehicle fitment
This stabilizer is sized for specific vehicles. Confirm the vehicle application and bracket requirements for your truck before mounting.
Steering stabilizers are sized for particular vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Steering stabilizer work can affect steering alignment, so have the alignment checked after mounting.
What’s included
One stabilizer with the bushing mount described above.
Not included: Brackets and the shock boot.








