Select your vehicle

Fox Racing Shox 2.0 Performance Series ATS Stabilizer – 983-02-118

Fox Racing Shox

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fox 2.0 Performance Series ATS steering stabilizer, part number 983-02-118
  • Vehicle fit is not confirmed for this part; confirm before ordering.
  • Extended length 25.25 in., collapsed length 17.15 in., stroke 8.1
  • 24 clicks of external adjustment and an integrated reservoir
  • Aluminum body with a 1-1/8 tie rod size

Description

Overview

The Fox Racing Shox 2.0 Performance Series ATS steering stabilizer, part number 983-02-118, is an adjustable through shaft (ATS) steering stabilizer, also called a steering damper. Its design cancels unwanted steering forces in both directions and replaces two conventional opposing stabilizers. Vehicle fit is not confirmed for this part, so confirm it before ordering.

Fox describes 24 clicks of external adjustment to fine tune the feel, plus an integrated reservoir that adds fluid capacity and improves cooling during extreme use. The aluminum stabilizer has a 1-1/8 tie rod size, an extended length of 25.25 in. and a collapsed length of 17.15 in.

Key features

  • Cancels unwanted steering forces in both directions, replacing two conventional opposing stabilizers
  • 24 clicks of external adjustment to fine tune steering feel
  • Integrated reservoir for additional fluid capacity and better cooling during extreme use
  • Relocating hardware that moves the stabilizer up and out of the way, using a track bar relocation bolt and tie-rod mounting clamp

Adjustment and setup

External adjustment lets you change how firmly a steering stabilizer responds without removing it from the vehicle. Settings are most useful when tire size, terrain or speed range changes, since each shifts how much steering damping feels right. Start from the middle of the range and make one change at a time.

A through shaft design connects the two damping sides, so one unit can handle movement in both directions. An integrated reservoir adds fluid capacity, which helps the unit cool during extended hard use. Keep the reservoir and seals free of dirt during service, and inspect the relocation bolt and tie-rod clamp at each oil change.

  • Make small adjustments and test on one route
  • Inspect reservoir and seals during service
  • Check relocation hardware for wear

Specifications

Brand Fox Racing Shox
Part number 983-02-118
UPC 714686858052
Series 2.0 Performance Series
Type ATS (Adjustable Through Shaft) steering stabilizer, stabilizer only
Material Aluminum
Extended length 25.25 in.
Collapsed length 17.15 in.
Stroke 8.1 (unit not stated in listing)
Tie rod size 1-1/8
External adjustment 24 clicks
Reservoir Integrated
Single / dual Single
Shock boot Not included
Brackets Not included (see What’s included)

Vehicle fitment

Vehicle years, makes and models are not confirmed for this part. Check the track bar and tie rod layout on your vehicle before choosing this stabilizer.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The relocating hardware uses a new track bar relocation bolt and a tie-rod mounting clamp to move the stabilizer up and out of the way. Because the spec table lists brackets as not included, compare the box contents with the hardware your vehicle needs. A qualified steering shop can handle the installation.

What’s included

The package includes Fox’s relocating hardware, a track bar relocation bolt and tie-rod mounting clamp. Brackets are not included, so compare the box contents with the hardware your vehicle needs.

Not included: Shock boot.

SKU: FOX983-02-118 Category:

Specification

Shipping weight 10.00 lbs
Package dimensions 32.00 × 6.50 × 2.50 in
brands

Questions & Answers

What is the Fox 983-02-118 stabilizer?

It is a Fox Racing Shox 2.0 Performance Series ATS (Adjustable Through Shaft) steering stabilizer in aluminum, with an extended length of 25.25 in. and a collapsed length of 17.15 in. It has an integrated reservoir and 24 clicks of external adjustment.

Does this stabilizer include relocating hardware?

Yes. The relocating hardware includes a track bar relocation bolt and tie-rod mounting clamp, which move the stabilizer up and out of the way. Brackets are not included, so check the package contents before ordering.

Which vehicles does part 983-02-118 fit?

No vehicles are confirmed for part 983-02-118. Confirm your vehicle's year, model and trim before ordering, and check the track bar and tie rod layout against the stabilizer.

How often should the adjustment be changed?

Change the setting only when steering feel changes with tire size, terrain or speed. Make small steps, then drive the same route to judge the effect before adjusting again. Note the position so you can return to a setting that worked well.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon