Overview
Part 985-24-064 is the Fox Racing Shox 2.0 Performance Series Smooth Body IFP Bushing Mount steering stabilizer, a single unit that is stabilizer only. Its IFP design and smooth body come from the 2.0 Performance Series, and Fox credits its engineers with testing the design for travel and performance.
This stabilizer carries a Universal Fit label only. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Single-unit steering stabilizer
- Smooth body with IFP design
- Bushing mount style
- Stabilizer only
- Brackets not included
Choosing mounts that match
Mount compatibility matters more than most shoppers expect. A bushing mount needs a bracket with a matching eye size and bolt pattern, and a mismatch can pinch the bushing or bend the mounting tab. Measure the existing mounting points on the frame and axle before ordering, and compare them with the stabilizer body and hardware.
Bushings absorb small movements, so they wear over time and can start to clunk or allow play at the steering wheel. Replacing a worn bushing is usually simpler than replacing the whole stabilizer, but only if the body and shaft are still undamaged. Check the damper for oil seepage at the seals before deciding.
Keep the mounting bolts snug after the first few trail runs, since vibration loosens fasteners. Use thread-locking compound where the hardware calls for it, and inspect the bushing at each service interval.
- Measure eye size and bolt pattern before buying brackets
- Look for oil seepage around the damper seals
- Retighten mounting hardware after the first trail runs
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-064 |
| UPC | 70000668648 |
| Series | 2.0 Performance Series |
| Mount | Bushing mount |
| Body | Smooth body |
| Design | IFP |
| Configuration | Single |
| Type | Stabilizer only |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
Before ordering, make sure the stabilizer suits your vehicle’s year, model and trim. Part 985-24-064 carries a Universal Fit label only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so have mounts that suit the bushing mount design ready before fitting the stabilizer.
What’s included
One Fox 2.0 Performance Series bushing mount steering stabilizer.
Not included: brackets and shock boot.









