Overview
The Fox Racing Shox 985-24-046 is a 2.0 Performance Series Smooth Body IFP steering stabilizer, sold as a stabilizer only with brackets not included. It helps relieve load on steering components and keeps tires tracking straight, which matters when running oversized off-road tires that can wander.
It is built for a comfortable on-road feel and predictable off-road handling. Its internal floating piston separates the shock oil from the high-pressure nitrogen gas chamber, which limits oil aeration so the factory-tuned valving performs as intended.
Key features
- Smooth body IFP design with an internal floating piston
- Aluminum body with a 5/8 inch alloy steel shock shaft
- NitroSteel hard-coated shaft to resist pitting and scratches that can damage seals
- Factory-tuned precision valving for predictable control on and off road
- Stabilizer-only configuration with no brackets and no shock boot
Length and mounting considerations
Stabilizer length must suit the distance between mounting points, since an incorrect fit can limit travel or load the steering unevenly. The extended and collapsed dimensions show the range of the unit, and stroke shows how much it can move between those points.
Oversized tires add load to steering components, so the stabilizer’s role in keeping tires tracking becomes more important. Check the ends, mounts and any spacer hardware for wear, and replace worn bushings or ends that allow excess movement. Lubricate pivot points as your vehicle’s service information directs. Measure the existing mounts and plan the bracket setup before starting, so the new stabilizer can be installed without forcing it.
- Measure mounting points before ordering
- Check stabilizer ends for play
- Plan bracket setup before installation
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-046 |
| UPC | 70000677844 |
| Series | 2.0 Performance Series |
| Design | Smooth body IFP |
| Type | Stabilizer only |
| Body | Aluminum |
| Shaft | 5/8 inch alloy steel, NitroSteel hard-coated |
| Stabilizer count | Single |
| Extended length | 23.95 in |
| Collapsed length | 15.35 in |
| Stroke | 8.6 in |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check that the stabilizer length suits your mounting points.
Oversized tires put extra demand on steering components, so match the stabilizer length to your mounting points. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so have the mounting brackets for your vehicle on hand before starting the install. Steering stabilizers carry sustained loads, so check every fastener and clearance after installation.
What’s included
The stabilizer is the only item named. Not included: brackets and the shock boot.







