Overview
The Fabtech FTS89922 is a shock absorber conversion mount and is universal fit. It includes bearings, spacers and retaining rings.
Because the mount is universal, it is not tied to a named vehicle. Confirm that the bearings, spacers and rings suit your shock and mounting points before assembly.
Key features
- Shock absorber conversion design
- Includes bearings
- Includes spacers
- Includes retaining rings
Bushings and mount hardware
A conversion mount relies on bearings and spacers to let the shock pivot without binding. Worn bearings introduce play that shows up as clunking over washboard and uneven tire wear, so the condition of these parts matters as much as the mount itself.
Spacers set the position of the shock relative to the bracket. Keep them clean and check that they sit flat against the bearing faces. Grease the bearings lightly during assembly, and avoid overtightening the fasteners, since that can crush the bearing housing.
Inspect the mount after rough terrain. Retaining rings can loosen or work out of their grooves, and bent rings should be replaced rather than reused.
- Check bearings for play during inspection
- Keep spacers clean and seated flat
- Replace bent or loose retaining rings
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS89922 |
| UPC | 674866018716 |
| Included hardware | Bearings, spacers, retaining rings |
Vehicle fitment
It is universal fit, so no particular vehicle year, make or model applies. Make sure your vehicle’s year, model and trim suit the mount before buying.
Confirm your vehicle’s year, model and trim before ordering.









