Overview
The Fabtech FTS21193 is a shock absorber mount kit in the Fabrication & Tools category under shock mounts. A shock mount holds a shock absorber to the vehicle’s frame or axle. It is a direct-fit part, but vehicle fit still needs confirming before ordering.
Confirm the kit contents, material and shock size against your installation before starting.
Shock mount basics
A shock mount transfers the force of the shock absorber into the frame or axle, so it sees constant load over rough ground. Shock mounts often wear at the bolt holes and welds before the shock itself fails. A cracked weld, elongated hole or loose fastener calls for prompt repair before further driving.
Before choosing a mount, confirm the shock eye style, stud or bolt size and the position on the vehicle. Fabrication work changes the structure of the suspension, so any welding should be done by a qualified shop. After installation, check that the shock moves freely through its full travel and that nearby brake lines and the driveshaft have clearance.
- Shock eye style and bushing fit
- Weld condition around the mount
- Clearance to brake lines and driveshaft
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21193 (also FABFTS21193) |
| UPC | 674866098015 |
| Product type | Shock absorber mount kit |
| Category | Fabrication & Tools > Shock Mounts |
| Fit type | Direct fit. |
Vehicle fitment
No vehicle, years or chassis code are given for this mount kit, so no fitment is listed.
Confirm fit for your vehicle’s year, model and trim before ordering, including the shock size and axle or frame position.
Installation notes
Because shock mounts carry suspension loads, use a professional installer. Support the vehicle on rated jack stands on level ground, follow the included instructions, and torque all fasteners to the correct values.
Re-check the mounting hardware after a short drive and confirm the shocks move freely through full travel without hitting brake lines or the driveshaft.
Shock mounts are part of the suspension and carry heavy loads. Any welding or fabrication should be done by a qualified professional.









