Overview
The Fabtech FTS21113 is a multiple front shock system with performance shocks, designed for a 4 in. lift. It fits 2011–2013 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD, and 2011 Ford F-250 and F-350 Super Duty trucks.
The system is a bolt-on design with no welding and uses 1.5 in. OD tubular components. It increases dampening capacity, and installation takes about 4 hours.
Key features
- Multiple front shock system with performance shocks
- Designed for a 4 in. lift height
- Bolt-on installation with no welding
- 1.5 in. OD tubular construction
- Increases dampening capacity
Choosing a lift height
A lift changes the geometry of the front suspension, so the shocks must be matched to the height the truck runs. A multiple front shock system adds damping at the front axle, which helps control body motion on uneven ground and when the truck carries a load. Measure the lift already on your truck before buying so the components you choose match it.
Front shock work is often done with steering and front end parts in mind. Inspect the ball joints, tie rod ends and wheel bearings before installing new shocks, since worn parts can change how the system behaves. After the install, check that the tires clear the fenders at full steering lock and that the driveline angles remain acceptable.
- Confirm lift height against the kit before ordering
- Inspect steering and front end parts first
- Recheck alignment after the first few drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21113 |
| UPC | 674866034303 |
| Location | Front |
| Position | Front |
| Lift height | 4 in. |
| Tubing | 1.5 in. OD tubular |
| Installation | Bolt on, no weld |
| Install time | 4 hour |
| Type | With shocks |
Vehicle fitment
It fits 2011–2013 Chevrolet Silverado 2500 HD (LT, LTZ, WT) and 3500 HD (LT, LTZ, WT); 2011–2013 GMC Sierra 2500 HD (Denali, SLE, SLT, WT) and 3500 HD (Denali, SLE, SLT, WT); and 2011 Ford F-250 Super Duty (King Ranch, Lariat, XL, XLT) and F-350 Super Duty (King Ranch, Lariat, XL, XLT).
The Ford fit covers the 2011 model year only, and Chevrolet and GMC years outside 2011–2013 are not covered. Match your truck’s year and trim to the entries above before ordering.
Installation notes
It is a bolt-on system with no welding, with an install time of 4 hours, for a 4 in. lift height. Confirm the 4 in. lift height matches the lift already on your truck before installing.
What’s included
The performance shocks are included with the system. Check the other components against your installation before starting.









