Overview
The Fabtech FTS22142 is a multiple front shock system for the 2011 Ford F-250 Super Duty and the 2011–2012 Ford F-350 Super Duty. It is listed without shock absorbers and is designed for use with part numbers K2133, K2133DB, K2134 and K2134DB.
The system bolts on without welding and is built to increase dampening capacity. Plan for a 4 hour install time.
Key features
- Bolt-on design with no welding
- 1.5 in. OD tubular construction
- Designed to increase dampening capacity.
- Designed for use with PN K2133, K2133DB, K2134 and K2134DB
Planning the shock installation
Bolt-on front shock systems are usually installed in a single session, but the work goes faster with the truck supported safely and the old shocks removed in order. Lay out all brackets, bolts and washers before starting, and confirm you have the right tools. A helper makes it easier to line up the brackets while the truck is on jack stands.
Since this kit does not include shock absorbers, buy them before install day so the work is not interrupted. Choose units that match the mounting points and the stroke the system needs. After the first few drives, check the bolts for tightness and look over the shocks, brackets and bushings for wear or leaks.
- Support the axle with jack stands before removing old shocks
- Lay out all hardware before starting
- Recheck bolt tightness after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22142 |
| UPC | 674866029897 |
| Location | Front |
| Position | Front |
| Fitment type | Direct fit |
| Type | Without shocks |
| Compatible part numbers | K2133, K2133DB, K2134, K2134DB |
| Install time | 4 hours |
Vehicle fitment
It fits the 2011 Ford F-250 Super Duty in King Ranch, Lariat, XL and XLT trims, and the 2011–2012 Ford F-350 Super Duty in King Ranch, Lariat, XL and XLT trims. Confirm your vehicle’s year, model and trim before ordering.
2012 F-250 Super Duty models are not on this list, and other Super Duty generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fabtech gives a 4 hour install time for this bolt-on system. Because the kit is listed without shocks, plan the shock installation as a separate step.
What’s included
The front shock system comes without shock absorbers.
Not included: shock absorbers, and the listed compatible part numbers K2133, K2133DB, K2134 and K2134DB.









