Overview
The Fabtech FTS420-50BK Multiple Shock Bracket is a black front bracket for mounting shocks on 1999–2004 Ford F-250 Super Duty and F-350 Super Duty trucks and 2000–2005 Ford Excursion models. It is sold without shocks.
The bracket is a bolt-on tubular system that requires no cutting or welding. Limiting straps are included with the bracket.
Key features
- Bolt-on tubular design
- Requires no cutting or welding
- Limiting straps included
- Black finish
- Front location, direct fit
- Shocks not included
Choosing shocks for this bracket
A front shock mount carries the shock’s load through the axle and the frame, so the bracket and its hardware need to stay tight and undamaged. Because the bracket is sold without shocks, the shock choice is up to you. Match the shock’s eye-to-eye length, stroke and mounting studs to the bracket’s mounting points before you buy, and make sure the shock clears its full travel against the springs, brake lines and steering components.
Front shocks on heavier trucks work hard under towing and on rough roads, so they often wear faster than rear units. When you replace the shocks, it is common to inspect the bushings, the mounting hardware and any limiting straps at the same time. Worn bushings can cause clunking and uneven damping that a new shock will not cure.
- Check shock length and stroke before ordering
- Inspect mount bolts and limiting straps after the first few drives
- Replace worn bushings along with the shocks
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS420-50BK |
| UPC | 674866014299 |
| Position | Front |
| Fitment type | Direct fit |
| Finish | Black |
| Installation | Bolt-on, no cutting or welding |
| Included hardware | Limiting straps |
| Type | Without shocks |
Vehicle fitment
It fits the 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS, XLT), the 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT) and the 1999–2004 Ford F-350 Super Duty (same trims).
Super Duty models from 2005 onward are outside this fit, and other Ford models are not covered here. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is bolt-on with no cutting or welding, so mounting does not require modifying the truck. The limiting straps are included with the bracket.
What’s included
The bracket includes limiting straps.
Not included: shocks, since this bracket is sold without them.














