Overview
The Fabtech 8-inch Lift Kit with Dirt Logic SS 4.0 Coilovers, part number K2023DL, is a coilover conversion for 2000 to 2004 Ford F-250 and F-350 Super Duty trucks. It includes Dirt Logic SS 4.0 coilover shocks, Dirt Logic SS shocks for the rear and long travel leaf springs for the rear.
The coilover conversion replaces the stock coil spring buckets with gusseted 1 3/4-inch tubing, which Fabtech says gives the front end added strength.
Key features
- Dirt Logic SS 4.0 coilover conversion system for the front
- Dirt Logic SS shocks for the rear
- Front component box coilover conversion
- Gusseted 1 3/4-inch tubing in place of the stock coil spring buckets
- Rear hanger kit
- Rear long travel leaf springs
Radius arm and 4 link compatibility
A coilover conversion replaces the stock coil spring buckets, so the front load path depends on the rest of the axle and control arm setup. Radius arm and 4 link systems handle axle location and braking forces in a way that suits this kind of front end, which is why leveling or basic systems are not a match.
Bump stops are a key part of a long-travel coilover setup. Hydraulic bump stops control the last part of compression and protect the shocks and mounts, so they are worth budgeting for alongside the kit. Check the rear leaf spring hangers and shackles for wear before the install, since the long travel leaf springs load them differently.
Steering and driveline angles change at this height, so the front end should be aligned after the work is finished. Inspect the coilover mounts and the gusseted tubing welds during routine service, and look for cracks or loose bolts after rough trail use.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2023DL |
| UPC | 674866096226 |
| Lift height | 8 inches |
| Lift height range | 7 inches and up |
| Suspension type | Coilover |
| Rear lift method | Leaf springs |
| Shocks | Dirt Logic SS 4.0 coilovers (front) and Dirt Logic SS shocks (rear), included |
Vehicle fitment
The kit is for 2000 to 2004 Ford F-250 Super Duty and Ford F-350 Super Duty trucks.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is compatible with radius arm and 4 link systems only, and it does not work with leveling or basic systems. Hydraulic bump stops complete the conversion. The lift changes the geometry at both ends, so check the alignment and driveline angles after installation.
What’s included
Front coilover conversion components and front component box, Dirt Logic SS 4.0 coilover shocks, rear hanger kit, rear Dirt Logic SS shocks and rear long travel leaf springs. Hydraulic bump stops are not included.









