Overview
The K1046DL is a 6-inch RTS lift with Dirt Logic SS shocks, developed for the GM HD platform. The patent pending bracket system keeps the torsion bars raised in their stock location, so they do not hang low where they could be high centered or damaged off road.
The unitized bracketry keeps the four front compression stops in place as GM designed, spreading impact loads across a wide section of the frame instead of one point. The kit works with both 18-inch and 20-inch diameter wheels, and it fits extended and crew cab models only.
The RTS torsion bars stay raised in the stock location, which keeps them from hanging low where they could be damaged. The lift needs only two holes drilled, which keeps installation simpler.
Key features
- 6-inch lift height, range 5 to 6.99 inches
- Torsion bars kept in the stock location
- Four front compression stops retained
- High arched crossmembers and front differential skid plate of 1/4-inch steel
- Heavy duty bracketry that needs only two holes drilled
- Dirt Logic SS shocks included
Wheels, tires and backspacing
Wheel backspacing decides where a tire sits relative to the fender and the front suspension. A wheel with the wrong backspacing can rub on the lift components or the frame, even when the tire size is correct. Mount the wheels and turn them through full steering travel before finalizing the setup.
Dirt Logic SS shocks are built for rougher terrain, and they work best when the rest of the suspension is in good condition. Replace worn bushings and check the rear components before adding larger wheels. Tire pressure and load rating should be matched to the truck’s weight and the work it does.
Taller and wider tires add weight to the wheel assembly, which affects braking and steering response. Check lug nut torque after the first drive and at regular intervals.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1046DL |
| UPC | 700007502011 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle, RTS torsion bar brackets |
| Rear lift method | Lift blocks and U-bolts |
| Cab styles | Extended and crew cab |
| Tire and wheel fit | 35/13.50R18 on 18×9, 35/13.50R20 on 20×10, 355/65R18 on 18×9, 37/13.50R20 on 20×10; 5 3/4-inch backspacing; minor trimming |
| Shocks | Dirt Logic SS shocks included |
Vehicle fitment
It fits extended and crew cab models only. Check that your truck’s year, model and trim match before ordering.
Installation notes
Fabtech says installation needs only two holes to be drilled, with no cutting of the front differential housing. Plan on minor trimming with every listed tire and wheel combination.
What’s included
RTS torsion bar brackets, high arched crossmembers, the 1/4-inch steel front differential skid plate, rear lift blocks and U-bolts, and Dirt Logic SS shocks.









