Overview
The Fabtech K2256DL is a 6 inch radius arm lift system with DLSS shocks. The patent pending radius arms have a fully tubular structure, dimple die side plates and an adjustable alignment cam that allows caster adjustment.
This system includes DLSS shocks. Verify your vehicle’s fit before ordering.
Key features
- 6 inch lift
- DLSS shocks
- Patent pending radius arms
- Fully tubular radius arm structure
- Dimple die side plates
- Adjustable alignment cam for caster
Driveline and axle geometry
A radius arm lift moves the axle, and that movement changes the angles at both ends of the driveshaft. Small changes in pinion angle can add vibration at speed, so the driveline should be checked after the lift is installed. Caster and pinion angle work together, so the alignment and the driveline check should be planned as one job.
Brake hoses and wiring that reach the axle may need a length check after the height change. Look for stretch, rubbing and chafing at the frame brackets, and correct any contact before the vehicle goes back on the trail.
Tubular arms give a rigid link, but the joints still depend on bushings or heim ends. Inspect those joints regularly, and keep fasteners tightened to the values given in the installation guidance included with the kit.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2256DL |
| UPC | 70000831758 |
| Lift | 6 inches |
| Shocks | DLSS |
| Radius arm | Patent pending, fully tubular |
| Caster | Adjustable by alignment cam |
Vehicle fitment
Verify the year, model and trim of your vehicle before you buy.
Installation notes
Because the arms set the axle location, an alignment is needed after installation. Use the adjustable cam to set caster during that alignment.
What’s included
The radius arm lift system comes with DLSS shocks. Review the package contents against your installation plan before starting.








