Overview
The Daystar ComfortRide KT09111BK is a 2 inch leveling lift kit made from polyurethane coil spring spacers for the 2001-2006 Toyota Sequoia in Limited and SR5 trims. The kit is black and needs a wheel alignment after installation.
Daystar says its Comfort Ride Suspension kits increase vehicle height, improve ground clearance, allow larger tires, and use most of the stock components.
The position data conflicts: the title and short text say rear, while the attribute fields list the position as front and the lift method as front lift only. Confirm the position with Daystar.
Coil spring spacers are installed in the spring stack to raise or level one end of the vehicle. A leveling lift like this changes ride height by a modest amount and keeps most of the stock suspension parts in use.
Key features
- 2 inch leveling lift kit
- ComfortRide coil spring spacer kit
- Polyurethane spacer material
- Black finish
- Wheel alignment needed
- Uses most stock components.
Coil springs and ride height
Coil springs carry the weight of the vehicle, and a leveling spacer changes the height of the spring stack without replacing the springs themselves. Because the spring sits between the frame and the axle, any change to the stack also changes the geometry of the control arms, driveline angles and steering linkage. That is why the wheel alignment and a check of the driveline are part of a proper leveling job.
Shock absorbers are usually the next part to review after a lift. Longer spacers can extend the shock’s travel, so older shocks that are worn may fail sooner. Inspect the bushings, brake hoses and sway bar links after installation, and listen for rubbing on the tires at full turns.
- Check shocks for leaks or worn bushings
- Inspect brake lines for stretch at full droop
- Re-torque spring seat and hardware after a short drive
Specifications
| Brand | Daystar |
|---|---|
| Part number | KT09111BK |
| UPC | 814423011013 |
| Part type | Coil spring spacer kit, ComfortRide suspension |
| Lift | 2 inch leveling lift |
| Position | Rear (title and short text); attributes list front |
| Spacer material | Polyurethane |
| Finish color | Black |
| Alignment | Wheel alignment needed |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Daystar KT09111BK includes:
- 2001–2006 Toyota Sequoia (Limited, SR5)
It fits the 2001-2006 Toyota Sequoia in Limited and SR5 trims. Check the year, model and trim against your vehicle before ordering.
Installation notes
Spacers sit in the coil spring stack and change ride height, so compress the spring safely with a proper spring compressor or leave that step to a shop.
Keep the vehicle on jack stands while the springs are out, and set the spring seats correctly when you reassemble.
Have the alignment checked afterward, and make sure the new height is legal where you drive.
What’s included
ComfortRide coil spring spacer kit.
Not included: Check the package contents against your installation before starting, since shocks and other hardware are not part of the kit.









