Overview
The Daystar PANL221PA is a 2-inch front coil spring leveling kit that corrects the front-to-rear stance. It has two urethane coil compression spacers that sit on the coil springs and two machined billet aluminum spacers that sit on top of the strut mount plate. The kit allows up to 32-inch diameter tires and is designed to keep the suspension geometry in place.
Daystar’s design splits the lift between the coil spring and the top of the strut. This limits excessive coil spring pre-load and limits the overall travel of the strut, which keeps the ride smooth while the suspension geometry is maintained to prevent premature component wear.
It fits the 2005–2014 Nissan Frontier. Confirm fit for your vehicle’s year, model and trim before ordering, including any Nissan Titan application.
Key features
- 2-inch front lift
- Two urethane coil compression spacers
- Two CNC machined billet aluminum strut spacers
- Heavy-duty hardware and thread locker included
- Keeps proper suspension geometry to limit wear.
Spacer types explained
Urethane spacers absorb small vibrations and sit on the coil, while billet aluminum pieces are machined to hold their shape under load and sit against the strut mount. Splitting the lift between the two keeps any single component from carrying all of the height change, which reduces strain on the spring.
When the strut top is involved, check that the mount plate and bearing move freely after installation. Clean the threads before fitting the locker, and inspect the hardware at regular service intervals. Any sign of galling or cracking on the spacers means they should be replaced.
- Inspect billet spacers for cracks or galling
- Reapply thread locker to fasteners removed during service
- Recheck strut mount movement after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | PANL221PA |
| UPC | 618089008659 |
| Lift height | 2 inches |
| Position | Front |
| Spacer material | Billet aluminum and urethane |
| Maximum tire diameter | 32 inches |
| Installation time | About 2 hours |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2014 Nissan Frontier in Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims. If you drive a Nissan Titan, confirm fit before ordering.
Other Frontier years, and any Titan application, should be confirmed with Daystar. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes about 2 hours and uses a thread locker with the included hardware. The spacers are billet aluminum and urethane, with the billet pieces seated on top of the strut mount plate. Have the front alignment checked afterward, because the leveling changes front height.
What’s included
- Two urethane coil compression spacers
- Two billet aluminum coil spring spacers
- Heavy-duty hardware and thread locker
- Detailed installation instructions









