Overview
The Daystar PACL222PA is a torsion bar leveling key lift kit covering 1.5 to 2.5 inches of lift. The torsion key adjusts the torsion bar preload to raise the front of the vehicle.
It is a direct-fit kit. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Torsion bar leveling key
- 1.5 to 2.5-inch lift range
- Direct fit
Torsion bar preload basics
A torsion bar works by twisting along its length, and the bar’s preload sets the ride height at the front. Adjusting preload with a leveling key changes how far the bar is twisted, which raises the front end without changing the spring rate. Because the bar is loaded differently after adjustment, the front suspension sits at a new angle and the steering geometry should be checked.
Preload changes are easiest to judge after the vehicle is loaded the way it normally runs. Check the front tire spacing, the height on both sides and any rubbing at full steering lock. Older torsion bars can take a set over time, so a worn or sagging bar may need replacing before a leveling key is added. Sway bar links, shocks and bushings are commonly inspected during the same job.
- Measure front height on both sides before and after adjustment
- Check for tire rubbing at full steering lock
- Inspect torsion bars for sag or cracking
Specifications
| Brand | Daystar |
|---|---|
| Part number | PACL222PA |
| UPC | 618089008291 |
| Lift height range | 1.5 to 2.5 inches |
| Lift method | Torsion bar leveling key |
| Fitment type | Direct fit |
Vehicle fitment
Check your year, model and trim against the application before ordering.









