Overview
The PATL230PA is a 2.5 inch front strut extension leveling kit for the 2005 to 2016 Toyota Tacoma. It uses a pair of one-piece steel strut extensions to level the front with the rear, and it fits 2WD and 4WD models.
The kit allows tires up to 32 inches in diameter and installs without a coil spring compressor in 1 to 2 hours.
Key features
- 2.5 inch front lift without changing the existing suspension
- Allows tires up to 32 inch diameter
- High quality 1/4 inch laser cut and welded steel strut extensions
- Machined differential drop down spacers
- High strength hardware
- Manufactured in the U.S.A.
- No coil spring compressor needed.
Strut extension installation
A strut extension lifts the front by lengthening the strut assembly, so the stock spring stays in place. The extension is a steel spacer, and the steel thickness and weld quality decide how well it handles repeated loads on rough ground. On a Tacoma, that load comes from the frame, the steering and the driveline working together.
Differential drop spacers move the axle position so the driveline angles stay within range. Check those angles after the lift, and watch for vibration at highway speed, which can point to a driveshaft angle issue. Tires larger than stock add weight to the front, so recheck clearance at full steering lock and inspect strut mounts over time.
- Check driveline angles after installation
- Inspect strut extension welds at service intervals
- Recheck hardware torque after the first trail runs
- Look for tire rub at full steering lock
Specifications
| Brand | Daystar |
|---|---|
| Part number | PATL230PA |
| UPC | 618089008765 |
| Lift | 2.5 inches, front |
| Strut extension thickness | 1/4 inch steel |
| Differential spacers | Machined drop down |
| Maximum tire diameter | 32 inch |
| Drivetrain | 2WD and 4WD |
The kit installs without a coil spring compressor, which makes the 1 to 2 hour install possible.
Vehicle fitment
It fits the 2005-2016 Toyota Tacoma Base, Limited, SR, SR5, TRD Off-Road and TRD Sport models. Confirm fit for your year, model and trim before ordering.
Installation notes
The kit installs without a coil spring compressor. Check the driveline angles and differential position after installation, and get an alignment once the new height is set.
What’s included
Included: a pair of one-piece strut extensions, machined differential drop down spacers and high strength hardware.









