Overview
The Daystar PATL231PA is a leveling kit for the 2005 to 2016 Toyota Tacoma. It has a 2.5 inch front strut extension and a 1 inch rear lift with cast steel lift blocks and U-bolts, so the front and rear of the truck are raised together.
The front lifts 2.5 inches and the rear lifts 1 inch. The kit allows tires up to 32 inches in diameter.
Key features
- 2.5 inch front lift with a strut extension
- 1 inch rear lift with cast steel blocks
- Heavy-duty 1/4 inch thick front leveling spacers, laser cut and precision welded
- Machined differential skid plate spacers
- High strength hardware
- Works without a coil spring compressor.
- Tires up to 32 inch diameter
Two-end lift considerations
Lifting both ends changes the stance in a different way than a front-only kit. The rear block lift uses cast steel blocks with U-bolts, so the rear springs and axle are raised together with the front. Balance matters here: the front and rear heights need to match closely for the truck to drive predictably.
The U-bolts and block hardware carry load over time, so check their torque after the first trail runs and inspect the threads for wear. A rear lift also changes shock angle and length, so shock travel is worth a look. A tire size up to the rated diameter adds load on both ends, which makes the rear bump stops and the front strut extensions worth inspecting regularly.
- Check rear shock length after the lift
- Recheck U-bolt torque after the first drives
- Inspect the front strut extensions for wear
- Compare front and rear heights for balance
Specifications
| Brand | Daystar |
|---|---|
| Part number | PATL231PA |
| UPC | 618089008239 |
| Front lift | 2.5 inches |
| Rear lift | 1 inch |
| Rear lift method | Cast steel lift blocks with U-bolts |
| Front spacer thickness | 1/4 inch steel |
| Maximum tire diameter | 32 inch |
The rear 1 inch lift uses cast steel blocks with U-bolts, which are included, so the rear and front are raised together.
Vehicle fitment
Check that your Tacoma’s year, model and trim match before ordering. The fit covers Base, Limited, SR, SR5, TRD Off-Road and TRD Sport.
Installation notes
Because the kit lifts both ends, check the rear shock length and driveline angles after installation, and align the front once the strut extensions are set.
What’s included
Included: front strut extensions, 1 inch cast steel rear lift blocks with U-bolts, machined differential skid plate spacers and high strength hardware.









