Overview
The Daystar PATL224PA is a 2-inch front leveling kit for the Toyota Tacoma. It uses a pair of CNC machined billet aluminum spacers to correct the front-to-rear stance and allows the use of tires up to 32-inch diameter. The kit installs in about 2 hours with everything needed included.
Key features
- 2-inch front leveling lift
- CNC machined billet aluminum spacers
- Allows up to 32-inch diameter tires
- Keeps factory wheels usable after installation
- Does not alter the OEM suspension geometry or factory stability parameters
Front-only leveling and steering
A front-only leveling system adds height at the front without changing the rear, which can change the vehicle’s nose height and the angles of the front driveline. Billet aluminum spacers are machined to a precise profile, so they seat consistently on the stock components when installed correctly. Clean the mating surfaces during installation so the spacers sit flat.
Because the rear is not lifted, check the front tire clearance against the fender and inner liner under full steering lock. Inspect the steering components and brake lines for stretch after the work is finished, and recheck the front alignment after the first short drive. Keep the mounting hardware torqued as the service manual directs, and check it at each tire rotation.
- Clean mating surfaces before installing
- Check tire clearance at full lock
- Recheck alignment after installation
Specifications
| Brand | Daystar |
|---|---|
| Part number | PATL224PA |
| UPC | 618089008703 |
| Lift height | 2 inches |
| Position | Front |
| Spacer material | Billet aluminum |
| Maximum tire diameter | 32 inches |
| Installation time | About 2 hours |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2016 Toyota Tacoma in Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
Tacoma years outside 2005–2016 are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because it is a front-only leveling system, check the front alignment after installation. The kit installs within about 2 hours.
What’s included
- Pair of CNC machined billet aluminum spacers
- Everything needed for installation









