Overview
The Crown Automotive J5356104 is a stock replacement arm for power steering on the 1976-1983 Jeep CJ5, the 1976-1986 Jeep CJ7 and the 1981-1985 Jeep Scrambler.
Classic CJs get hard use off road, and the pitman arm is one of the parts that takes a beating from rocks and ruts. A bent arm throws the steering off center, which is why many owners swap in a fresh stock arm.
This arm is a stock replacement, so it matches the factory angle. Owners who have lifted their CJ and want a lowered link angle would pick a dropped arm, such as the Pro Comp CJ400.
Because the list covers all CJ7 years and most CJ5 years, many classic Jeep owners will find a match. The arm matches the factory part.
Many CJ owners keep their trucks near stock height, and for them a stock arm is the right choice. Those who have lifted may prefer a dropped arm, which is a different product.
Key features
- Stock replacement arm for power steering
- Fits CJ5, CJ7 and Scrambler models
- Amount of drop: stock replacement
- Direct fit
- Fitment list spans 1976 to 1986
Steering linkage and wear
The pitman arm connects the steering gearbox output shaft to the drag link, turning the sideways motion of the box into steering movement at the front wheels. On a power steering CJ it carries the full load from the box, so any looseness at the arm shows up as play in the wheel.
Signs of wear include wandering on the highway, a loose or clunking feel when turning and a wheel that does not return to center. Check the arm’s taper and the nut for looseness, and inspect the drag link ends, tie rod ends and steering box for play before blaming the arm alone. Off-road hits can bend the arm, and a bent arm often leaves the wheels off center.
When replacing the arm, mark its position on the shaft and check steering centering after the nut is tightened. Recheck the nut and linkage after the first few drives, and test the steering on a level road with the wheels straight.
- Check the drag link ends for play
- Inspect the arm for bends or cracks
- Mark the arm’s position before removal
- Recheck the nut after the first drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5356104 |
| UPC | 848399063691 |
| Product type | Pitman arm |
| Amount of drop | Stock replacement |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive J5356104 includes: 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade); 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade); 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
It fits the CJ5 from 1976 to 1983, the CJ7 and the Scrambler. Earlier CJ5 years and the Wrangler YJ are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The arm is pressed on, so use a puller to remove it from the steering box shaft. Fit the replacement with the box centered, tighten the nut, and then check the drag link.
What’s included
- One pitman arm, part number J5356104








