Overview
The Skyjacker CA50 is a 2 inch drop pitman arm for 1967–1991 Chevrolet and GMC four-wheel-drive trucks and SUVs, including the K10, K20, K5 Blazer, Suburban, Jimmy and V-series models, with power steering.
Skyjacker names it an Extreme Drop Pitman Arm and promotes it with the line No More Bump Steer To Worry About, together with a limited lifetime warranty. The specification line gives the drop as 2 inches, in the front position.
The fitment covers several Chevrolet and GMC naming schemes across more than two decades: K10 and K20 from 1967, K5 Blazer from 1975, and V10, V20, V1500 and V2500 in the late 1980s and early 1990s.
Owners of these older trucks should match both the year and the model name, as the list uses names such as K15, K25, K1500 and K2500 for equivalent GMC trucks across different periods, and the Blazer and Jimmy years are listed separately.
Key features
- 2 inch amount of drop
- Front position
- For power steering
- Direct fit
- Carries a limited lifetime warranty
- Skyjacker promotes it as ending bump steer worries
- Covers Chevrolet and GMC trucks, Blazers, Jimmy and Suburbans
Pitman arm and steering control
The pitman arm connects the steering box to the drag link, so it carries the steering force from the driver to the front wheels. A drop pitman arm changes that geometry to lower the steering link, which affects steering feel and the angle of the drag link on a lifted truck.
Because the arm works under constant load, its taper and the nut at the steering box can loosen over time. Inspect the arm for cracks or bending, and check the nut and retaining hardware at each service. Look for play in the steering wheel and wandering on the road as early warnings.
When the arm is replaced, check the drag link, tie rod ends and steering box for wear, since a new arm on worn parts can produce vague steering. A steering damper or stabilizer may also need to be rechecked after the geometry changes.
- Check the arm for cracks or bends
- Inspect the taper and retaining nut
- Recheck steering play after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | CA50 |
| UPC | 803696120379 |
| Product type | Extreme Drop Pitman Arm |
| Amount of drop | 2 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
| Warranty | Limited lifetime warranty |
Vehicle fitment
The CA50 covers these Chevrolet and GMC models: 1969–1974 and 1987–1991 Chevrolet Blazer; 1967–1986 K10 and K20; 1968–1986 K10 and K20 Suburban; 1975–1986 K5 Blazer; 1987 V10 and V20; 1987–1988 V10 and V20 Suburban; 1989–1991 V1500 and V2500 Suburban; 1986 GMC C2500 Suburban; 1970–1991 GMC Jimmy; GMC K15, K25, K1500 and K2500 trucks and Suburbans in model years from 1967 to 1986; and 1987–1991 GMC V1500 and V2500 trucks and Suburbans.
Later Chevrolet and GMC trucks are not covered by the CA50, and coverage runs from 1967 to 1991. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The CA50 is a direct fit for front power steering. Follow the installation steps closely and have a qualified technician check steering once the arm is installed.
What’s included
One pitman arm. Check the package contents against your installation before starting.












