Overview
The Crown Automotive JA001116 is a power steering pitman arm for use with a 4 cylinder engine. It fits early Jeeps: the CJ3, CJ5, CJ5A, CJ6, CJ6A and Willys CJ-2, CJ-3, CJ-5 and CJ-6. It is a stock replacement.
The 4 cylinder condition is the main caution, because the same CJ model may have been built with a different engine and steering arrangement. Crown also lists years by model, so a 1974-1979 CJ5 is not included while 1959-1973 and 1980-1983 are.
Its amount of drop is stock replacement. Crown gives no size or material.
Early CJ owners should check the model year against the list, since the 1974-1979 CJ5 is absent. The arm matches the 4 cylinder steering setup.
The fit covers civilian CJ models and Willys models, so check the model name in your vehicle’s paperwork to find the right year range.
Key features
- Power steering pitman arm
- Use with a 4 cylinder engine
- Covers nine model entries
- Stock replacement amount of drop
- Direct fit
Steering geometry and the pitman arm
The pitman arm takes the output of the steering box and moves the drag link, so it carries the full steering load on every turn. Wear in the arm, the nut or the splined connection shows up as slop at the steering wheel and wandering on the road.
When you replace the arm, check the drag link end, the tie rod ends and the steering box mounting. A new arm on worn links will still feel loose, and the front end alignment should be checked after the work is complete.
Keep the arm tightened to the box shaft with the correct torque, and avoid heating the shaft when removing the old arm. A puller is the safer way to remove the arm, because hammering can damage the box internals.
- Play at the steering wheel
- Drag link end that moves by hand
- Steering that pulls to one side
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | JA001116 |
| UPC | 848399073256 |
| Product type | Pitman arm |
| Amount of drop | Stock replacement |
| Steering type | Power steering |
| Engine | 4 cylinder |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive JA001116 includes: 1959–1966 Jeep CJ3 (Base); 1959–1973, 1980–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade); 1966–1968 Jeep CJ5A (Base); 1959–1971 Jeep CJ6 (Base); 1966–1968 Jeep CJ6A (Base); 1946–1949 Jeep Willys CJ-2; 1949–1958 Jeep Willys CJ-3; 1955–1958 Jeep Willys CJ-5; 1956–1958 Jeep Willys CJ-6.
The CJ5 fits 1959-1973 and 1980-1983 only, not 1974-1979, and the CJ7 is not covered. The arm is for 4 cylinder use, so it does not fit vehicles with other engines. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pull the old arm from the steering box shaft with a puller. Install the replacement with the box centered, tighten the nut, and check the drag link end before driving.
What’s included
- One pitman arm, part number JA001116








