Overview
The Pro Comp CJ400 is a 4 inch drop pitman arm for four-wheel-drive Jeeps with power steering. It fits the 1976-1983 Jeep CJ5 and the 1976-1986 Jeep CJ7 and installs in the front position.
Pro Comp says its pitman arm keeps a Jeep’s steering in line over whatever terrain it meets. Dropping the arm lowers the drag link end, which flattens the link angle after a lift.
It is limited to 4WD power steering. Manual steering CJs are not covered.
The CJ400 is the dropped alternative to the stock replacement arms for CJ5 and CJ7 Jeeps. It suits owners who have lifted a CJ and want a flatter drag link.
The CJ5 and CJ7 are short-wheelbase Jeeps, so a drag link is short and its angle changes quickly with a lift. A 4 inch drop arm addresses that angle.
It installs as a direct bolt-on part.
Key features
- Dropped pitman arm with 4 inch drop
- For 4WD power steering only
- Direct bolt-on installation
- Front position
- Direct fit
Steering geometry after a lift
A pitman arm connects the steering box to the drag link, so its geometry sets how the front wheels respond to steering input. When a Jeep is lifted, the drag link runs at a steeper angle, which can cause bump steer and make the steering feel loose on rough ground. Dropping the arm lowers the link end and brings that angle closer to level.
Before buying, measure the current drag link angle and check how much the wheels move through full travel. Check the steering box for play, along with the tie rod ends and drag link joints, since worn parts make any correction less effective. Many owners find that steering box centering matters as much as the arm itself.
- Check the steering box for play
- Confirm the drag link joints are tight
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | CJ400 |
| UPC | 614901110029 |
| Product type | Dropped pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Steering type | 4WD power steering only |
| Installation | Direct bolt-on |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp Suspension CJ400 includes: 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade); 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade).
It fits the CJ5 for 1976-1983 and the CJ7 for 1976-1986. Earlier CJ5 years and manual steering CJs are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The installation is direct bolt-on, with no cutting or welding required.
Pull the stock arm with a puller, then bolt on the Pro Comp arm with the steering box centered. After installation, turn the wheel lock to lock to check clearance, then confirm the drag link is tight.
What’s included
- One pitman arm, part number CJ400










