Overview
The Rubicon Express RE2505 is a 2.5 inch drop pitman arm for 1972–1986 Jeep CJ5, CJ6 and CJ7 models with a manual steering box.
The 3.5 Inch Plus designation is for Jeeps running more than 3.5 inch of lift. A drop pitman arm helps reduce steering linkage angles on lifted vehicles.
The RE2505 is for manual steering only and sits in the front position.
Wrangler YJ models use a separate arm. The RE2505 is the CJ version, so confirm the model before choosing between them.
It fits CJ5 Base, Golden Eagle, Laredo, Limited and Renegade trims, CJ6 Base trim, and CJ7 Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims. It is intended for CJ owners with a manual steering box and more than 3.5 inch of lift, and it is not made for power steering.
Key features
- Drop pitman arm with a 2.5 inch drop
- For CJ models with a manual steering box only
- Helps reduce steering linkage angles on lifted vehicles.
- Recommended on Jeeps running more than 3.5 inch of lift
- Front position
- Direct fit
Steering geometry basics
A pitman arm connects the steering box to the drag link, so its angle determines how the linkage moves when the wheels turn. On a lifted Jeep, the stock arm can sit at a steeper angle, which can cause bind and uneven steering response. A drop arm changes that geometry, and the amount of change depends on the lift height and the steering box position.
Because the drag link and track bar work together with the arm, check their ball joints and bushings whenever the arm is changed. Look for play at the steering box, uneven tire wear and a wandering feel at highway speed. Tie rod ends and the drag link are often replaced alongside a new arm when they show wear, and a steering stabilizer can help control steering feel on lifted models.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2505 |
| UPC | 614901440232 |
| Product type | Drop pitman arm |
| Amount of drop | 2.5 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Manual steering |
| Lift guidance | More than 3.5 inch of lift |
Vehicle fitment
It fits three CJ models, with the trims shown below.
- 1972–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1972–1975 Jeep CJ6 (Base)
- 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
Make sure the year, model and trim match your vehicle before ordering, especially if you have a YJ or later Wrangler.
Installation notes
It is a direct fit for manual steering boxes. Follow the installation steps carefully and have a qualified technician check the steering after installation.
What’s included
One drop pitman arm. Confirm the hardware you need before starting the installation.









