Overview
The Crown Automotive 52088649AC is a black rubber lower arm pivot bushing for the 2004–2007 Jeep Liberty KJ. It is a front inner part for the front left lower position. It is a direct fit for the trims covered below.
Control arm pivot bushings let the arm move with the suspension while keeping it located at the frame. When a bushing wears, the arm moves more than it should, and replacing the bushing restores that location. Measure the old bushing and compare it with the new one before ordering.
Key features
- Rubber construction
- Black finish
- Front inner position
- Lower control arm pivot bushing
- Direct fit to the listed Liberty trims
Signs of a worn bushing
A worn control arm pivot bushing usually shows up as a clunk over bumps, vague steering or a wandering feel at speed. Uneven tire wear along the front can also come from an arm that has moved out of location. Look at the rubber for cracks, tears and separation from the metal sleeve, and check for movement at the arm with a pry bar while the vehicle is safely supported.
Replacing the bushing is a good time to inspect the rest of the front suspension, including the ball joints, tie rod ends and the other side’s bushing. Bushings on both sides are exposed to the same conditions and often wear at a similar rate. Clean the seat in the arm before pressing in the new part, and use the correct tools so the rubber is not damaged during installation.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52088649AC |
| Position | Front left lower, inner |
| Color | Black |
| Type | Rubber |
| Fitment | Direct fit |
Vehicle fitment
The bushing fits the 2004–2007 Jeep Liberty KJ in the 65th Anniversary Edition, Limited, Renegade and Rocky Mountain Edition trims.
Other Liberty years and the Wrangler and Grand Cherokee are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation involves removing the lower control arm so its seat can be checked before the new bushing is pressed in. Check the alignment once the arm is back on the vehicle.









