Overview
The Crown Automotive 52060138AA is a front upper control arm bushing for the axle end of the control arm, made for 2 and 4-door models of the 2007-2018 Jeep Wrangler JK.
Upper control arm bushings differ by end and side, so the position must match the old part before you order a replacement. Compare the old bushing’s size, shape and markings with the new one before installing it.
Key features
- Fits 2 and 4-door models.
- Axle end location.
- Front upper position.
- Fitment list covers 2007-2018 Wrangler JK with named trims, including Unlimited versions.
Signs the bushing is worn
Control arm bushings take the load at the point where each arm pivots, and rubber bushings like this one soften, crack and separate from their sleeves with age and road exposure. On a Wrangler, the front upper arms help control steering and braking movement, so a worn bushing often shows up as a loose or vague feel when the vehicle changes direction. Replacing the bushing restores a controlled pivot instead of letting the joint move freely.
Before ordering, look at the arms themselves. Check the bushing bore for play, look for split rubber, and see whether the sleeve has rusted in place. Mounting bolts and nuts should be inspected too, because a new bushing pressed into a damaged arm will not hold alignment for long.
- Cracked or split rubber around the bushing
- Clunks over bumps or when turning
- Play at the arm when rocking it by hand
- Uneven tire wear that follows alignment changes
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060138AA |
| UPC | 848399091373 |
| Position | Front upper |
| Location | Axle end |
| Models | 2 and 4-door |
Vehicle fitment
It fits 2007-2018 Jeep Wrangler (JK) models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims and their Unlimited versions. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the axle end position and door count with your vehicle before fitting, since the bushing is named for 2 and 4-door models only. No installation steps or torque values are described.
What’s included
One bushing is described.
Not included: Confirm whether hardware or sleeves are needed for your installation.









