Select your vehicle

Bilstein 7100 Series Reservoir Shock Absorber – B46-0930R

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Bilstein 7100 Series reservoir shock, part B46-0930R
  • Gas pressure monotube body with a 2 in diameter
  • Remote reservoir version with Schrader valve fitting
  • Universal label; no specific vehicle tied to this part

Description

Overview

The Bilstein 7100 Series B46-0930R is a remote reservoir shock absorber built for stock trucks, prerunners, race buggies, sand buggies and other recreational off-road vehicles. The 7100 Series can be bought with or without a remote reservoir, and this number is the reservoir version.

The unit has a 2 inch shock body with gas pressure monotube design. The piston is high-flow, which reduces harshness, and the valving is self-adjusting with a deflecting disc. The Schrader valve fitting is part of the design, and the 7100 can be rebuilt by its owner for long service life.

Fit must be confirmed for your application because no vehicle is tied to this part number. The series comes in 8, 10, 12 and 14 inch travel, so check the length against your mounting before buying.

Key features

  • Remote reservoir version of the 7100 Series
  • Gas pressure monotube construction
  • 2 in diameter shock body
  • High-flow piston with self-adjusting deflecting disc valving
  • Owner rebuildable design

Trail use and heat

Reservoir shocks are often chosen for long descents and sustained rough terrain, where a damper can overheat and lose control. Extra oil volume in the reservoir gives the fluid room to cool, which helps the shock keep consistent damping from the first mile to the last.

Getting the installed length right is the first step with any shock swap. Measure the old unit at full extension and full compression, then compare it with the new one before tightening anything. Mounting orientation, reservoir placement and hose routing also affect how the shock performs on uneven ground, so plan each before the final install.

  • Measure both extension and compression
  • Route the reservoir hose away from heat sources
  • Keep the reservoir protected from debris

Specifications

Brand Bilstein
Part number B46-0930R
Shock series 7100 Series
Shock type Reservoir, monotube gas pressure
Body diameter 2 in
Valve Schrader
Travel options in series 8, 10, 12 and 14 in
Fitment type Universal

Vehicle fitment

A shock has to suit a specific truck’s length and mounting, so the universal label is not a fit guarantee. Confirm fit before ordering.

Confirm the travel and mounting against the vehicle you are building. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One reservoir shock absorber.

Questions & Answers

Is the B46-0930R a universal fit shock?

Not confirmed. It carries a universal label, but no specific vehicle is tied to this part number, so check length and mounting first.

Is this shock available without a reservoir?

Yes. The 7100 Series is sold with or without a remote reservoir, and the B46-0930R is the reservoir version listed here.

What valve fitting does this shock use?

The 7100 Series uses a Schrader valve fitting, the valve used for filling and checking the gas charge. Check the valve type on your unit when it arrives.

Why is the Schrader valve important on a gas shock?

The valve allows the gas charge to be checked and filled, which keeps the shock's performance stable over time. Low gas pressure can make a shock feel soft or foamy, so check it when the unit is serviced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon