Select your vehicle

Bilstein 5100 Series Front Shock Absorber – 24-315067

Bilstein

$123.00In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 1:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front shock for 2020–2026 Jeep Gladiator
  • Built for lifted trucks with a 3 to 4.5 in front lift
  • 46mm zinc-plated smooth body with eyelet mounts
  • Collapsed length 18.52 in and extended length 28.76 in

Description

Overview

The Bilstein 5100 Series 24-315067 is a front shock absorber for the 2020–2026 Jeep Gladiator. It is built for a lifted front end with a 3 to 4.5 inch lift and is sold as a single front shock, designed as a direct-fit option for lifted trucks and SUVs.

The shock is a monotube design with a 46mm zinc-plated smooth body and eyelet mounts at both ends. Its collapsed length is 18.52 inches and its extended length is 28.76 inches. The velocity-sensitive digressive piston is tuned for the application, which Bilstein says gives a significant improvement in ride quality, handling and comfort.

Key features

  • Built for a front lift of 3 to 4.5 inches
  • Monotube design with a digressive piston
  • 46mm zinc-plated smooth body
  • Eyelet mounts at the top and bottom
  • Sold individually

Lifted front end considerations

A front lift changes the angle of the front driveline, the steering geometry and the way the shock sits at full extension. On a lifted Gladiator the shock works through a longer stroke, so its extended length has to suit the new height. Set the lift first, then confirm the shock length fits, rather than fitting the shock and hoping the lift matches.

Larger tires and a heavier bumper add weight to the front end and make the dampers work harder. Check ball joints, tie rods and the track bar after a lift, since they carry more load. A monotube design handles heat well, but it cannot make up for worn steering parts or worn bushings.

  • Confirm the lift height before ordering
  • Check the driveline angle after the lift
  • Inspect tie rods and ball joints
  • Recheck alignment after the first few drives

Specifications

Brand Bilstein
Part number 24-315067
Shock series 5100 Series
Position Front
Shock type Monotube, gas-charged
Body diameter 46mm
Front lift 3 to 4.5 in
Collapsed length 18.52 in
Extended length 28.76 in
Top mount Eyelet
Bottom mount Eyelet
Fitment type Direct fit

Vehicle fitment

It fits the 2020 through 2026 Jeep Gladiator.

Gladiators from before 2020 are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One front shock absorber.

Installation notes

This shock is sized for a lifted front end, so check the lift height on your truck and confirm that the front alignment and driveline angles are set after the lift is installed.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 24-315067 fit a 2021 Jeep Gladiator?

Yes. The 24-315067 fits the 2020 to 2026 Jeep Gladiator, and a 2021 model is covered. Confirm the front lift you have installed matches the 3 to 4.5 inch range.

What lift height is this shock built for?

It is built for a front lift of 3 to 4.5 inches. Measure the lift on your Gladiator before ordering, because a shock sized for a different lift will not give the right extended length.

Is this a single shock or a pair?

It is sold individually, so a pair requires two orders. Order one for each front side of the Gladiator you are upgrading.

Does a larger tire need a different front shock?

Possibly. Larger tires change the effective wheel travel and add weight to the front end, so they can make the shock work harder. A shock sized for the lift you have installed is the first check, followed by a review of the steering and suspension parts.

How do I know the front shock has worn out?

Look for oil on the shock body, a front end that keeps bouncing after a dip, and uneven tire wear. Clunking over bumps can point to worn eyelet bushings. Replace the front shocks in pairs so both sides damp the same way.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon