Overview
The BedRug BRQ09SCSGK is a complete custom-fit truck bed liner for the 2009–2014 Ford F-150. It covers the cargo floor, the tailgate section and a bulkhead section, and is built from 100% polypropylene with a fiber work surface. The liner is meant to protect the bed floor from impact and to keep cargo from sliding during transport.
The fiber surface is ultra tough and carpet-like, and it is water and stain resistant. The closed cell foam floor does not absorb water, so water runs off the surface and out through the bed drain holes. The liner is formed to the contour of the bed and keeps its original shape, with factory tie-downs left accessible. It suits owners who haul tools, gear or wet loads.
Key features
- Slip and skid resistant fiber surface that holds cargo in place
- Closed cell foam floor, 3/4 in. thick, that will not absorb water
- Non-corrosive zinc alloy zipper; water exits through the truck bed drain holes
- Holds up to bleach, oil, gas and battery acid, which wash right off
- Cushioned, knee friendly surface that acts as a shock absorber
- Hinge prevents opening between the bed and the tailgate section
- Formed to the bed contour for a snug, tight fit with a smooth, flat surface
- Keeps factory tie-downs fully accessible
- Limited lifetime warranty
Everyday use and maintenance
A pickup bed liner sees daily loading, and the floor takes most of the wear. Heavy coolers, lumber and tool cases can compress a thin surface, so a 3/4 in. foam floor helps the liner recover its shape after repeated loads.
Keep the drain holes open so water leaves the bed quickly. Lift out debris after wet hauling, and rinse the surface with a hose and mild soap. Dry it before storing gear, which prevents grit from drying into the fiber.
Check the zinc alloy zipper and the tailgate hinge after rough trips. Rinse grit from both and avoid forcing a stuck zipper. The tailgate section should seat flush against the bed to keep the seal and hinge working as intended.
- Clear debris from the drain holes
- Rinse and dry the fiber surface after wet loads
- Check zipper and hinge after rough trips
- Keep tie-downs accessible for securing cargo
Specifications
| Brand | BedRug |
|---|---|
| Part number | BRQ09SCSGK |
| UPC | 870558002142 |
| Material | 100% polypropylene |
| Floor | 3/4 in. closed cell foam |
| Surface | Fiber, slip and skid resistant |
| Zipper | Non-corrosive zinc alloy |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It is a direct fit for the 2009–2014 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Platinum, SVT Raptor, XL and XLT trims.
Other Ford F-150 generations and other Ford models fall outside this fit, so check your year and trim before you order.
What’s included
The kit includes the main bed liner, a bulkhead section and a tailgate section.








