Overview
The BedRug Ultra Bed Liner, part number UTC14SBK, is a four-piece zipped truck bed liner built around a 3/4 inch thick foam core and a TPO composite surface. It is designed to protect the bed floor and cargo from dents while giving a cushioned, knee-friendly surface, and it installs with hook and loop fasteners rather than being sprayed or bonded to the bed.
Spray-in liners are a common alternative, but they can fade and chalk over time and are hard to remove once applied. This liner’s material is fade and UV resistant, and the foam does not absorb water, which helps resist mold and mildew. Water runs off the surface, through the zippered perimeter and out the factory drain holes in the truck bed, and the liner can dry in as little as 20 minutes.
Key features
- Four-piece zipped liner that installs with hook and loop fasteners
- Heavy duty 3/4 inch cushioned foam layer with strong dent protection
- Textured, anti-skid TPO composite work surface for cargo
- Non-woven fiber backing meant to keep the truck bed from being scratched
- Custom contoured fit for a snug, tight finish
- Water runs through the zippered perimeter and out factory drain holes
- Foldable tailgate gap hinge
- No sanding or prepping needed, and installation does not damage the truck bed
Choosing a bed liner type
Drop-in liners like this one sit on the bed floor rather than bonding to it, which makes them easier to remove for cleaning or a different load setup. Because the liner has a foam layer, it adds cushioning for kneeling and handling heavy items, but the foam layer also adds thickness that can reduce the usable bed height. Check the bed clearance before choosing a liner for tall cargo.
Keep grit and debris out from under the liner, since trapped material can wear the surface over time. Lift the zipped sections to clean beneath them, then check that the drain holes in the bed are clear so water can exit. Tonneau covers and bed caps may need clearance around the liner edges, so confirm the tailgate and cover fit before installing.
Specifications
| Brand | BedRug |
|---|---|
| Part number | UTC14SBK |
| UPC | 870558004801 |
| Configuration | Four-piece zipped liner |
| Surface | TPO composite, textured and anti-skid |
| Foam thickness | 3/4 inch |
| Backing | Non-woven fiber |
| Fastening | Hook and loop |
| Drying time | As little as 20 minutes after water exposure |
| Fitment listed | Direct Fit (no vehicle years or models named) |
Vehicle fitment
Fitment is Direct Fit. Confirm the fit against your vehicle’s year, model and bed length before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The liner fastens with hook and loop strips across its four zipped pieces. Installation requires no sanding or prepping of the bed.
What’s included
The liner is a four-piece zipped system.













