Overview
The Baer Brakes 6920228 is a right-side, one-piece full cast vented replacement brake rotor with a 14 inch outside diameter and a 1.181 inch nominal thickness. It is a slotted, drilled and zinc-plated cast iron rotor with a 3.098 inch center hole, six lug holes on a 5.5 inch bolt circle, and an overall height of 3.764 inches. It is used in the Baer ES+1 and AlumaSport systems.
This is a one-piece rotor rather than a two-piece hat-and-ring design, and it is directional and made for the right side only. Confirm the Baer system and hub size before buying.
Key features
- Purpose-built castings from premium materials
- Curved vane design aimed at cooling
- Built for rotor stability and resistance to distortion
- Dynamically balanced for vibration-free running
- Slotted, drilled and zinc-plated finish
- Directional brake surface, right side only
- Full cast, one-piece construction
Center hole and hub fit
A one-piece full cast rotor centers on the hub through its center hole, so the register has to match the hub closely for the rotor to sit square. Clean any rust or debris from the hub register and face before mounting, and do not force a rotor that does not seat easily. If a hub-centric ring or spacer is used, confirm it is designed for the same center size.
Because the whole rotor is one casting, wear or cracking usually means replacing the complete part. Check the surface for heat cracks and deep grooves, and inspect the hub face for corrosion that could cause runout. Consistent brake feel after installation is a good sign that the mounting is correct.
- Clean rust off the hub register before mounting
- Check hub face condition with a dial indicator if runout is suspected
- Seat lug nuts evenly in a star pattern
- Replace the rotor if the surface is cracked or badly grooved
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920228 |
| UPC | 844165036869 |
| Axle side | Right |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Outside diameter | 14 in |
| Nominal thickness | 1.181 in |
| Overall height | 3.764 in |
| Center hole diameter | 3.098 in |
| Stud/lug holes | 6 |
| Stud/lug hole circle diameter | 5.5 in |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
It is used in the Baer ES+1 and AlumaSport systems, so confirm your system and hub size before ordering.
Confirm your vehicle’s year, model and trim before ordering. The 3.098 inch center hole and 5.5 inch bolt circle must match your hub, so do not substitute a rotor with a different pattern.
Installation notes
Check the 3.098 inch center hole against your hub register before mounting, and confirm the 3.764 inch overall height clears your Baer assembly. Because the rotor is directional, verify it is the right-side part first, and have a qualified brake technician inspect the fit before driving.
What’s included
One right-side full cast rotor, sold as each.
Not included: ABS tone ring (the part details state it is not included).












