Overview
The Baer Brakes 6919165 is a 13.000 x 1.100 inch replacement brake rotor for the left side of the vehicle, a one-piece full cast cast iron rotor with a plain friction surface and a tall hat. It is used in certain Baer Track4, SS4 and other Baer Brake systems, so it suits owners who run that hardware.
The rotor is directional, so left and right parts are not interchangeable. It has purpose-built castings, curved vanes for cooling, and dynamic balancing for vibration-free running. It has a 3.089 inch center hole and an overall height of 2.232 inch, and it has no drum in hat.
No vehicle, model year or chassis code is given for part number 6919165. Match the bolt pattern, center hole and overall height to your Baer system before choosing it.
Key features
- Plain friction surface with no slots or drilled holes
- One-piece full cast construction in cast iron
- Tall hat design with no drum in hat
- Directional rotor made for the left side only
- Curved vane design intended to help cooling
- Dynamic balanced for vibration-free performance
Before you buy
A brake rotor works with the pads and caliper to slow the wheel, so the rotor is only one part of the system. Before ordering, look at the friction surface, hub register, lug pattern and hat height together, since a rotor that is close in diameter can still sit wrong on the hub. Check the old rotor for thickness, heat cracks, scoring and a lip at the outer edge, and replace it if it is worn past its minimum thickness.
Left and right rotors are sold separately, so a pair usually means ordering two parts. Plain friction surfaces are a common choice for road use because they are simple to clean and easy to inspect. Pads are often replaced at the same time, because new pads bed in best against fresh rotor surfaces. Keep the hub clean and free of rust before fitting, and check that the rotor sits flat against the hub face.
- Compare hat height with the old rotor
- Check the hub for rust and damage
- Replace pads when rotors are changed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919165 |
| UPC | 90127961469 |
| Size (diameter x thickness) | 13.000 Inch X 1.100 Inch |
| Overall height | 2.232 Inch |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 5.00 Inch |
| Center hole diameter (hub register) | 3.089 Inch |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Surface type | Plain |
| Rotor type | Vented |
| Brake surface | Directional |
| Hat style | Tall hat |
| Drum in hat | No |
| ABS tone ring included | No |
| Axle | Left |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for certain Baer Track4, SS4 and other Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional and specific to the left side, check the side before mounting it on the hub. Compare the hat height with the old rotor before fitting. Brake components are safety-critical, so have a qualified technician verify the installation.
What’s included
One left-side replacement rotor, sold as each. Rotors are sold individually, so the opposite side needs a separate part.
Not included: Brake pads, calipers and hub hardware are not part of this item.
