Overview
The Baer Brakes 6929111 is a 13-inch, one-piece, vented replacement brake rotor for the right side, finished with slots, drilling and zinc plating. It is made for certain Baer Track4, SS4 and other Baer Brake systems.
The castings are purpose built, with a curved vane design that aids cooling. The rotor is directional, so this right-axle part is made only for that side. Part number 6929111 has a 2.781-inch center hole and five studs.
Key features
- Slotted, drilled and zinc-plated braking surface
- Full cast, one-piece construction
- Vented design with a curved vane pattern for cooling
- Directional rotor made for the right axle side
- The design is intended to resist distortion and support rotor stability.
- Dynamically balanced for vibration-free performance
- Cast iron body in a performance grade.
Before you buy
Replacing a brake rotor is a good moment to check the rest of the brake system. Pads, calipers, hub faces and wheel bearings all affect how a rotor runs, and worn pads can wear a new rotor unevenly if they are not replaced at the same time. Pads should suit the rotor’s friction surface and how the vehicle is driven, since a slotted and drilled rotor can change how quickly pad material wears and how the pedal feels when cold.
Before ordering, measure the existing rotor’s outside diameter, thickness and hat height, and compare the stud count and hub circle with the old part. Clean the hub face fully, because rust scale or debris can cause runout. When pads are changed, inspect the rotor for cracks, heavy scoring and thickness below the minimum stamped on it.
- Compare hub circle and stud count with the old rotor
- Clean the hub face and mounting surface before fitting
- Replace pads and rotors together when wear is uneven
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929111 |
| UPC | 844165054696 |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Solid or vented | Vented |
| Brake surface | Directional |
| Axle | Right |
| Outside diameter | 13 inches |
| Nominal thickness | 1.1 inches |
| Overall height | 2.232 inches |
| Center hole diameter | 2.781 inches |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 and 4.75 inches |
| Grade type | Performance |
| Emission code | 6 |
| Drum in hat | No |
| ABS tone ring included | No |
| Quantity | Each (one rotor) |
| Country of origin | USA |
Vehicle fitment
It is made for certain Baer Track4, SS4 and other Baer Brake systems. Confirm fit for your vehicle’s year, model and trim, and confirm your brake system matches, before ordering.
Confirm your vehicle’s year, model and trim before ordering. The left-side rotor is a separate part and is not interchangeable with this right-side rotor.
Installation notes
The rotor is directional and specific to one side, so it should be installed only in the right-axle position. The ABS tone ring is not included, so check whether your application needs one before installation. Brake rotor work should be done by a qualified technician.
What’s included
One 13-inch right-side replacement rotor per item (quantity: each).
Not included: ABS tone ring.
