Overview
The Baer Brakes Claw rear rotor set, part number 53011-020, is a pair of zinc-plated, cross-drilled and slotted replacement rotors for the rear axle of the 2003–2008 Dodge Ram 2500 and Ram 3500 and the 2006–2008 Dodge Ram 1500 Mega Cab with 8-lug wheels. Each rotor is a direct replacement part, designed to take the place of the original rear rotor.
The friction surface is both slotted and drilled, which lets gases and dust escape from between the pad and rotor during braking. That design supports a more consistent pedal feel and reduced brake fade. The zinc-plated finish gives a bright look behind open center wheels.
Key features
- Slotted and cross-drilled friction surface that channels gases and dust away from the pad-to-rotor contact area
- Enhanced vane structure and premium materials, described by the maker for cooling and durability
- Mill balanced, direct replacement rotor sold as a pair
- Chamfered cross-drilled holes intended to minimize stress cracking
- Zinc-plated finish for a bright appearance in open center wheels
- Directional brake surface on a vented rotor design
Before you replace rear rotors
Rear rotors carry less of the braking load than the fronts on most trucks, but they still need inspection at the same intervals as the pads. Heat from repeated stops can leave a raised lip at the outer edge of the friction face, and uneven wear can show up as a pulse in the pedal or a shudder when braking from speed. Hub and bearing condition matter too, because runout at the hub passes directly into the rotor face.
When a rotor is replaced, match the pads, hardware and hub surface to the new part. Clean the hub mating surface and remove any rust before setting the rotor, and check that it sits flat against the hub. Trucks used for towing or hauling put more heat into the rear brakes, so inspection should happen sooner in those cases.
- Check the friction face for deep grooves, heat cracks or a raised lip at the outer edge
- Look for blue discoloration or scoring that suggests overheating
- Clean the hub surface and confirm the lug holes line up before final torque
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 53011-020 |
| UPC | 844165003601 |
| Axle | Rear |
| Rotor construction | One piece, full cast |
| Material | Cast iron |
| Surface type | Slotted and cross-drilled |
| Solid or vented | Vented |
| Brake surface | Directional |
| Disc finish | Zinc plated |
| Stud/lug hole quantity | 8 |
| Mounting bolt hole circle diameter | 165 |
| Outside diameter | 351.92 |
| Overall height | 130.6 |
| Discard thickness | 28.5 |
| Emission code | 6 |
| Grade type | Premium |
| ABS tone ring included | No |
| Sold as | Set |
| Country of origin | CN |
Vehicle fitment
It fits the rear axle of the 2003–2008 Dodge Ram 2500, the 2003–2008 Dodge Ram 3500 with single or dual rear wheels, and the 2006–2008 Dodge Ram 1500 in the Extended Crew Cab Pickup body with the Mega Cab note and 8-lug wheels.
This rotor is for the rear axle of the trucks listed above. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The set is sold as a pair, so both rear rotors are supplied together. The rotor is cast iron with a 165 bolt circle and eight lug holes, so check the hub pattern on your truck against those figures before fitting. Brake rotor work affects stopping ability, so have the job done by a qualified technician who can also inspect the pads, calipers and hub.
What’s included
The kit includes a pair of direct replacement Claw rear rotors.
Not included: The ABS tone ring, which is not included with this set.














