Overview
The Baer Brakes 6920330 is a right-side replacement brake rotor for select Baer Brake systems. It is a two-piece, vented cast iron rotor with a slotted and drilled braking surface and a zinc-plated finish, sold individually.
The rotor is directional and built for the right side of the vehicle only. It has a curved vane design for cooling, is dynamically balanced for vibration-free running, and is designed for rotor stability and resistance to distortion. It suits owners replacing a right-side rotor on a compatible Baer system.
Key features
- Right-side, directional rotor
- Two-piece vented construction
- Slotted and drilled braking surface
- Curved vane design for cooling
- Dynamic balanced for vibration-free performance
- Zinc-plated finish
- Designed for rotor stability and resistance to distortion
Before you buy
Brake rotors wear with use. The braking surface gradually thins, and heat cycles can cause grooves, cracks, or a pulsing pedal when the surface becomes uneven. Slotted and drilled surfaces are intended to help clear gas and water, but the slots and holes also concentrate stress, so inspect the surface for cracks during routine brake service.
Two-piece rotors separate the hub from the friction ring, so the hub face and fasteners should be checked for corrosion and seating when the rotor is replaced. Clean the hub face and mounting surface before installing, and tighten fasteners to the torque values in the service information for your vehicle. Replacing rotors in pairs keeps braking even from side to side.
- Check the hub face for rust before fitting the rotor
- Confirm right-side orientation before tightening the fasteners
- Replace pads when the friction material reaches its wear limit
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920330 |
| UPC | 844165012375 |
| Construction | Two piece |
| Rotor type | Vented |
| Surface type | Slotted, drilled and zinc plated |
| Brake surface | Directional |
| Axle side | Right |
| Material | Cast iron |
| Outside diameter | 12 in |
| Nominal thickness | 1.1 in |
| Mounting bolt hole circle diameter | 7.5 in |
| Mounting bolt hole quantity | 12 |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is sold for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional and side-specific, match it to the right side of the axle it replaces. A left-side rotor is a different part. Rotors are sold individually, so order one for each position needed.
What’s included
One right-side replacement brake rotor, sold as each.
Not included: The ABS tone ring is not included with this rotor.
