Overview
The Rubicon Express JL7100FP is a 2.5-inch Super-Ride lift kit with FOX Performance shocks for the 2018–2026 Jeep Wrangler Unlimited JL. It is a direct fit for the 4-door Moab, Rubicon, Sahara, Sport and Sport S trims.
The kit is a short arm system with 1.75-inch diameter 4130 chromoly Super-Ride front lower arms, extended sway bar end links and extended bump stops. Coil spring rates are tuned for bump compliance and load handling.
The lift height range is 0 to 3.5 inches. The system clears 35-inch tires on a loaded non-Rubicon model and 37-inch tires on Rubicon models, and the FOX Performance shocks are included at the front and rear.
Key features
- FOX Performance Series shocks at the front and rear, included
- 1.75-inch diameter 4130 chromoly Super-Ride front lower arms
- Extended sway bar end links and extended bump stops
- Coil spring rates tuned for bump compliance and load handling
- Clearance for 35-inch tires on loaded non-Rubicon models and 37-inch tires on Rubicon models
Short arm geometry and tires
A short arm lift changes the front suspension geometry by moving the lower control arm mounting, which affects caster, camber and steering feel. Super-Ride arms are built to keep the axle controlled at higher ride heights. Larger tires add rotating mass and change gearing, so the feel of the truck shifts once the kit is fitted.
FOX shocks are tuned to suit a higher ride height, but they still depend on correct installation and length. Check the bump stops and sway bar end links for wear at the same time, and align the front end once the kit is set. Driveline angles should be measured after the install, since the lift can increase them.
- Check the lower arm bushings at service
- Re-check the steering stops after alignment
- Inspect the shock mounts for cracking
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJL7100FP (JL7100FP) |
| Kit type | 2.5-inch Super-Ride short arm lift kit |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Front shocks | FOX Performance |
| Rear shocks | FOX Performance |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler Unlimited (JL) Moab, Rubicon, Sahara, Sport and Sport S trims, all 4-door models.
The 2-door Wrangler and earlier Wrangler generations are not on this list, nor are the Gladiator models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The FOX shocks and the short arm system change the suspension geometry, so the alignment and the driveline angles should be checked after the install.
What’s included
The kit includes the FOX Performance Series shocks at the front and rear, the Super-Ride front lower arms, the sway bar end links and the extended bump stops.
The FOX Performance Series shocks are covered by the FOX warranty and do not qualify for the Rubicon Express Advantage Warranty.










