Overview
The Pro Comp Suspension 91-6100B is a black front sway bar link kit for a 4 inch lift. It is made for 1999–2010 GM trucks and SUVs, including the 1500 and 2500 series. The links connect the sway bar to the front suspension.
Extended links are needed once the front end is raised, because the stock links are too short for the new geometry. Confirm the model, trim and chassis code before choosing this kit.
Sway bar links and geometry
A front sway bar limits body roll by linking the two sides of the suspension. Sway bar end links carry that load from the bar to the control arm or strut, so they take up movement on every bump and turn. When the suspension is raised, the angle of the link changes, and a link of the correct length keeps the bar working as designed.
Worn links usually show up as a clunk over bumps or a loose feel when turning. Check the ball joints or bushings at each end, since a worn end can cause the same noise as a failed link. Replace links in pairs so both sides of the bar keep matching tension, and check the bar bushings and brackets while the links are off.
- Listen for clunks over uneven pavement
- Check ball studs for play by hand
- Inspect the bar bushings for cracking
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 91-6100B |
| UPC | 614901108842 |
| Position | Front |
| Lift | 4 inch |
| Color | Black |
| Years listed | 1999–2010 |
Vehicle fitment
Confirm the model and year of your truck before ordering, since this kit is made for 1999–2010 GM trucks and SUVs.
The links are sized for a 4 inch lift, so a truck on a different lift should be checked before installation.
What’s included
A front sway bar link kit in black.








