Overview
The TeraFlex 753020 is a front sway bar link for the 2007–2015 Jeep Wrangler (JK), designed for Wranglers with 6 inches of lift. It is a non-disconnect design, meaning the link stays attached to the sway bar.
A sway bar link, also called a stabilizer link, connects the sway bar to the suspension so the bar can resist body roll in turns. TeraFlex says its JK version reacts immediately under sway bar loading, which reduces excess play and improves lateral control and steering response compared with stock rubber sway bar link bushings. Silent operation and immediate response are the main features TeraFlex highlights.
Key features
- Upper end with an OEM quality narrow shoulder ball socket, which TeraFlex describes as maintenance-free for long-term durability.
- Lower end with a large polyurethane ball and pin for easy link removal.
- Operates silently.
- Immediate reaction during sway bar loading to eliminate excess play.
- Front position, direct fit for JK Wranglers with 6 inches of lift.
Sway bar link care and fitment
A sway bar link transfers movement between the sway bar and the suspension, so wear in the link shows up as clunks over bumps, looseness in steering, or a body that feels less settled in corners. Because the ends carry the load each time the suspension moves, they are the first place to inspect when the front end starts to feel loose.
Lift changes geometry. Links at the correct length keep the bar working as intended when the suspension is raised, so pair the link with the right lift setup and check that the bar rotates freely without binding. Bushings and track bar ends often wear at a similar pace, so inspect them together during service.
- Check the ball joint and polyurethane end for play by hand
- Look for torn boots or cracked polyurethane
- Re-torque the nuts after the first trail runs
- Inspect hardware at each tire rotation
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER753020 |
| UPC | 843885018216 |
| Position | Front |
| Link type | Non-disconnect sway bar link |
| Upper end | Narrow shoulder ball socket (OEM quality) |
| Lower end | Polyurethane ball and pin |
| Lift compatibility | Wranglers with 6 inches of lift |
| Fitment | Direct Fit |
Vehicle fitment
It fits 2007–2015 Jeep Wrangler (JK) models in the 70th Anniversary, Rubicon, Sahara, Sport and X trims, plus the Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X trims.
Not on the list: 2016–2018 Wrangler JK, Wrangler JL (2018 and later), and Wrangler TJ or LJ models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents for the link and any hardware before starting the installation.







