Jack Mount Kits covers the brackets that carry a Hi-Lift or similar farm jack securely on the vehicle: hood hinge mounts for the TJ, LJ and JK from Rugged Ridge and Warrior, roll bar and roll cage mounts from Hi-Lift Jack and Rugged Ridge, tire carrier and rear bumper mounts from Fab Fours and Rugged Ridge, weld-on tube mounts from Trail Gear, and keyed locking mounts from BOLT Lock.Pick a location that keeps the jack reachable and quiet, then compare the products below.
Jack Mount Kits
Showing 1–12 of 27 resultsSorted by popularity
-
Jack Mount Kits
HI-Lift TrailTrak Roll Cage Track Mounting System – TT-1000
- HI-Lift TrailTrak Roll Cage Track Mounting System, part number H/LTT-1000
- Mounts a Hi-Lift jack horizontally on the factory roll cage
- Jack can be placed in multiple positions
- Designed for Jeep Wrangler JLU (4 Door), 2018 to 2026 Wrangler (JL) range
SKU: H/LTT-1000 -
Jack Mount Kits
Go Rhino Exterior Front Fender Jack Mount (Black) – 701003T
- Driver side front exterior mount for high clearance off-road and farm jacks
- Mounts to hood cowl and lower rocker panel using factory mount points
- Holds the jack in a space-saving vertical position, rattle-free
- Fits 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- Part number 701003T, black textured powder coat, 5-year warranty
SKU: ORP701003T -
Jack Mount Kits
Garvin Hi Lift Jack Mount – 44007
- Attaches a Hi-Lift jack to Garvin Adventure Racks
- Works with Garvin Adventure Rack part numbers 34088, 44092, 44094, 44099, 20094, 20092 and 20099
- 1/4-inch steel brackets with black powder coat
- All mounting hardware included; drilling not required
- Hi-Lift jack not included
SKU: GRV44007 -
Jack Mount Kits
Fab Fours Hi-Lift Jack Mount – M2150-B
- Fab Fours Hi-Lift Jack Mount, part number M2150-B
- Bare steel J-mount, 3/16 inch construction
- Bolts to the rear tire carrier and holds a Hi-Lift jack on the rear bumper
- Fits 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- Installation needs part number FFIJP-Y1261T-1
SKU: FFIM2150-B -
Jack Mount Kits
BOLT Lock J-Mount Hi-Lift Jack Mount – 7028648
- BOLT Lock J-Mount for Hi-Lift jacks, part number SSC7028648
- Secures the jack with your own Jeep key
- Bolts into existing holes with no drilling required
- Automotive grade, weather-proof solid steel; limited lifetime warranty
SKU: SSC7028648 -
Jack Mount Kits
Warrior Hi-Lift Jack Mount – 3840
- Hi-Lift jack mount for the side of a Safari Racks cargo basket
- Mounts to any flat surface 3 inches or taller
- Steel with black powder-coated finish
- Fits 2007–2014 Toyota FJ Cruiser (Base, TRD Special Edition, Trail Teams Special Edition)
- Part number 3840, UPC 634146038407
SKU: W/I3840 -
-
-
Jack Mount Kits
Rugged Ridge Off-Road Jack Mounting Bracket Kit – 11586.08
- Complete kit with jack mounting bracket and spacer kit
- Built to work with the Rugged Ridge Spartacus Heavy Duty Tire Carrier
- Mounts an off-road jack to the Wrangler tailgate
- Fits 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- Part number 11586.08, UPC 804314291631
SKU: RUG11586.08 -
Jack Mount Kits
Rugged Ridge Offroad Jack Mounting Bracket – 11586.05
- Hood-mounted jack mounting bracket for Jeep Wrangler LJ (2004–2006) and TJ (1997–2006) models
- Made from high-strength 6061 T6 aluminum with a textured black powder coat
- Large thumb screws hold the jack and can be removed and installed while wearing gloves
- Part number 11586.05; gaskets and hardware included to protect the paint finish
SKU: RUG11586.05 -
Jack Mount Kits
Rugged Ridge Offroad Jack Mounting Bracket – 11586.04
- Made for 2007–2018 Jeep Wrangler JK, 2-door and 4-door trims
- Lightweight 6061 T6 aluminum hood jack bracket with textured black powder coat
- Large thumbscrews hold the jack; optional locking thumbscrews available
- Included hardware and gaskets to protect the paint finish
- Part number 11586.04, UPC 804314290924
SKU: RUG11586.04 -
Why the jack needs a real mount
A 48 inch Hi-Lift weighs around 30 pounds, is nearly as long as a Wrangler is wide, and has a steel base plate and a lifting mechanism full of sharp edges. Loose in the cargo area it becomes a projectile in a rollover and a hazard in a hard stop; strapped to a rack with bungee cords it rattles, rusts and walks loose. A dedicated mount holds the bar and the mechanism at two points, keeps the jack from moving on the trail, and puts it where you can get to it when the vehicle is stuck at an angle. Several mounts here also lock it against theft.
Mount locations compared
- Hood hinge: aluminum or steel brackets bolt to the existing hood hinge holes on a TJ, LJ or JK, no drilling. The jack lies across the hood in front of the windshield. Easy to reach, visible, and it does raise the hood slightly in the view; make sure the hood still opens and the wipers clear.
- Roll bar or cage: clamps or track systems hold the jack along the sport bar inside the vehicle or on the cage of a JL. It stays clean and dry and is hard to steal, but it uses interior space and must not interfere with the top or the rear seat.
- Tire carrier or rear bumper: a J-mount bolts to the swing-out carrier or bumper so the jack rides vertically beside the spare. Very accessible, out of the cab, but adds weight to a hinge that already carries the tire.
- Roof rack or cargo basket: brackets bolt to the side of a rack and hold the jack flat or vertical. Good for expedition setups with a rack already fitted, less convenient when the roof is loaded.
- Weld-on tube mount: laser cut steel tabs coped for 1 3/4 inch tube, welded to a cage or bumper for a custom location.
- Front fender exterior: a vertical mount on the cowl and rocker on a JK that keeps the jack outside and rattle-free.
Matching the mount to your vehicle and jack
Hood hinge and tailgate mounts are body specific: a JK hood bracket does not fit a TJ, and a Spartacus carrier mount only fits that carrier. Rack mounts fit particular racks, for example the Garvin mount works with a list of Garvin Adventure Rack part numbers, and the Warrior mount wants a flat surface at least 3 inches tall. Check the jack size too; most mounts take the standard Hi-Lift bar, and the cast and all-cast versions have slightly different bar profiles. Some kits are the complete mount, others are a bracket that needs a spacer kit or a second part listed in the description.
Installation and theft
Use the gaskets or rubber pads supplied so the bracket does not chew the paint, and tighten the thumbscrews or knobs by hand with a drop of oil on the threads so they come off in winter. Where a mount bolts through a rack or bumper, use a backing plate and locking hardware. Keyed locking mounts, such as the BOLT Lock J-mount that codes itself to your Jeep key, or locking thumbscrews sold as options, make a visible jack far less tempting. Add a strap or clip on the handle so it cannot flop and knock against the body. Check the mount every time you air up; a loose jack mount is one of the most common rattles on a built Jeep.
Keeping the jack usable
A jack carried outside gets wet. Oil the mechanism and the climbing pins regularly, and work the handle through its range before each trip. Bolt a base plate and a bumper lift adapter near the jack so the whole kit is together, and keep the jack's weight in mind for hood hinges and tire carriers that were never designed for it.
Popular Jack Mount Kits brands
- Rugged Ridge (5)
- Fab Fours (3)
- Hi-Lift Jack (3)
- Hauk Offroad (3)
- Warrior (2)
- BOLT Lock (2)
- Wilco Offroad (2)
- ARB 4x4 Accessories (2)
- Poison Spyder Customs (1)
- Rampage (1)
- Warn (1)
- Hyline Offroad (1)
Jack Mount Kits FAQ
Where is the best place to mount a Hi-Lift jack on a Jeep?
It depends on how you use it. Hood hinge mounts are the easiest to install and reach on a TJ or JK. Tire carrier and bumper mounts keep it outside and accessible. Roll bar and cage mounts keep it clean, dry and secure but use interior space. Choose the one you will actually maintain.
Will a hood mounted jack block my view or damage the hood?
The jack lies low across the hood and most drivers see over it, but check wiper and hood clearance. Use the rubber gaskets and pads supplied, tighten the knobs by hand, and clean under the mount so grit does not scratch the paint. Some owners add a hood protector.
Can a Hi-Lift mount be locked?
Yes. BOLT Lock mounts use a cylinder that codes to your Jeep ignition key, and Rugged Ridge offers locking thumbscrews as an option for its hood brackets. A cable lock through the jack and the mount is a simple alternative for racks and carriers.
Are jack mounts universal?
No. Hood hinge, tailgate and tire carrier mounts are built for specific vehicles or carriers, rack mounts fit specific racks, and tube mounts are sized to a tube diameter. Confirm the vehicle, carrier or rack named on each listing and the jack type it accepts.











