Overview
The Garvin Hi Lift Jack Mount, part number GRV44007, is a bracket kit that attaches a Hi-Lift jack securely to the Garvin Jeep Adventure Rack. Garvin Industries makes the brackets from 1/4-inch steel with a black powder-coat finish. The kit works with Garvin Adventure Rack part numbers 34088, 44092, 44094, 44099, 20094, 20092 and 20099.
The Hi-Lift jack is not included. The kit comes with all the mounting hardware needed to attach the jack to the rack, and installation requires no drilling.
Key features
- Mounts a Hi-Lift jack to Garvin Adventure Racks
- Brackets made from 1/4-inch steel with black powder coat
- All mounting hardware included
- No drilling required for installation
- Compatible with rack part numbers 34088, 44092, 44094, 44099, 20094, 20092 and 20099
Before you mount a jack
A Hi-Lift jack carries a lot of weight and leverage, so the bracket it mounts to has to hold steady on the rack during rough trail use. Before mounting, look over the rack planks and bracket fasteners for any looseness, and retighten them after the first few trail runs. A jack that rattles against the rack can wear paint and loosen hardware over time.
Think about where the jack sits relative to your recovery gear and spare tire. Keep the jack handle, base plate and pins within reach but secured so they do not shift. If you add other accessories to the rack, check that their weight and location leave room for the jack and do not block the release lever. A bracket kit like this works best when the rack, jack and mounts are chosen together.
- Inspect fasteners before every trip
- Keep the jack pins and handle secured
- Check the rack condition around the mount
Specifications
| Brand | Garvin Industries |
|---|---|
| Part number | GRV44007 |
| Finish | Black powder coat |
| Bracket material | 1/4-inch steel |
| Material (listed) | Aluminum |
| Rack length | 60 inches |
| Rack height | 2 inches |
| Number of planks | 4 |
| Cross bars included | No |
| Installation | Drilling not required |
Vehicle fitment
The mount fits the 2007–2018 Jeep Wrangler JK in 2-door and 4-door form, the 2018 Jeep Wrangler JL in 2-door and 4-door form, and the 1997–2006 Jeep Wrangler TJ. Confirm fit for your vehicle’s year, model and trim before ordering, and check that your rack matches a compatible part number.
The LJ and YJ are not in this list. The mount works only with the rack part numbers above, so check the rack first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is not needed, and the included hardware attaches the bracket to the rack. Check that your rack matches one of the compatible part numbers before installing.
What’s included
Brackets with all mounting hardware.
Not included: the Hi-Lift jack and the Garvin Adventure Rack.









