Overview
The Rugged Ridge 11586.05 is a hood-mounted jack mounting bracket for Jeep Wrangler LJ and TJ models, designed to hold an off-road jack on the hood where it stays accessible on the trail. It is made for the 2004–2006 Jeep Wrangler Unlimited (LJ) and the 1997–2006 Jeep Wrangler (TJ) in the trims shown in the fitment section below.
Rugged Ridge built the bracket from high-strength 6061 T6 aluminum and finished it with a durable textured black powder coat, aiming for a mount that is lightweight but sturdy for years of trail use. The skeleton style design and laser-etched logo give it a distinct look compared with most hood-mounted jack brackets.
Key features
- Hood-mounted design stores the off-road jack in a secure, reachable spot
- Lightweight 6061 T6 aluminum construction
- Durable textured black powder coat finish
- Skeleton style design with laser-etched logo
- Large thumb screws secure the jack; optional locking thumbscrews are available
- Thumbscrews can be removed and installed by hand, even while wearing gloves
- Included gaskets protect the paint finish
Hood and latch fit
Hood-mounted brackets bring the jack close to the body, so the hood and latch are part of the fit check. Before driving, close the hood and watch for contact with the jack or bracket. Aluminum parts can also react with dissimilar metals, so keep fasteners and gaskets in place and inspect the contact points periodically.
Trail use shakes everything loose, so re-check thumbscrews and the bracket hardware after rough runs. Keep the powder coat in good condition by touching up chips, and clean grit from the threads so the screws turn freely. Replace worn gaskets before they let the bracket rub on the paint.
- Close the hood fully and check clearance
- Re-check thumbscrews after rough runs
- Clean grit from the screw threads
- Replace worn gaskets to protect paint
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11586.05 |
| UPC | 804314290931 |
| Mount type | Hood jack mount |
| Material | 6061 T6 aluminum |
| Finish | Textured black powder coat |
| Design | Skeleton style with laser-etched logo |
| Jack retention | Large thumb screws (locking thumbscrews optional) |
| Included | Hardware and gaskets |
| Fitment type | Direct fit |
Vehicle fitment
It is made for the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and for the 1997–2006 Jeep Wrangler (TJ) 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X.
The list does not include other Wrangler generations such as the YJ, JK or JL, or Cherokee and Grand Cherokee models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation uses the hardware included with the bracket. The thumb screws let you remove and reinstall the jack by hand, even while wearing gloves. Because the bracket sits on the hood, check that the hood latch closes cleanly and that the jack stays firmly held before driving on rough trails.
What’s included
Hood jack mounting bracket with the included hardware and gaskets that protect the paint finish.
Not included: the off-road jack itself, and locking thumbscrews, which are an optional upgrade.




















