Overview
The Fab Fours Hi-Lift Jack Mount, part number M2150-B, is a bare steel J-mount that bolts to the rear tire carrier and holds a Hi-Lift jack on the rear bumper. It is made from 3/16 inch steel.
The manufacturer fitment list covers the 2007–2018 Jeep Wrangler (JK) in 2-door and 4-door models.
Key features
- Bare steel construction, 3/16 inch thick
- Bolts to the rear tire carrier
- Carries a Hi-Lift jack on the rear bumper
- Designed for 2-door and 4-door Wranglers from 2007 to 2018
Mounting a Hi-Lift jack safely
A J-mount holds the base of a Hi-Lift jack against the bumper, so the jack stays in reach on the trail. The jack should be secured with its pin and clip every time it is carried, since loose gear can rattle or fall during rough driving. Check the mount’s bolts and the bumper’s mounting points regularly, especially after heavy off-road use.
Choose a Hi-Lift jack and accessories that match the mount’s pin and base. A heavy jack shifts weight to the rear bumper, so consider how the load affects the rear end and the tire carrier. Keep the jack clear of the tailgate path and avoid carrying tow or recovery gear that adds weight on the same mount.
- Secure the jack with its pin and clip
- Recheck mount bolts after rough trails
- Inspect the mount for cracks or bends
- Keep the jack clear of the tailgate path
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | M2150-B |
| Material | Bare steel |
| Construction | 3/16 inch |
| Jack mounting type | J-Mount |
| Fits | 2007–2018 Jeep Wrangler JK, 2-door and 4-door |
Vehicle fitment
The manufacturer fitment list covers the 2007–2018 Jeep Wrangler (JK), including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims in 2-door and Unlimited 4-door form.
Wrangler TJ, LJ, JL and JLU models and the Gladiator are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires part number FFIJP-Y1261T-1. Have that part on hand before you start the install.
What’s included
The kit is the bare steel jack mount only.
Not included: Part number FFIJP-Y1261T-1, which installation requires, and a Hi-Lift jack are not included.









