Rocker Knockers vs rock sliders: body-mounted armor, frame-mounted rails, load paths, steel gauge, XRC cladding, nerf bars and TJ, JK and JL fitment.
Side Steps & Running Boards
Showing 661–672 of 689 resultsSorted by popularity
-
-
-
Running Board
RB20 Running Boards
- Go Rhino RB20 running boards in galvanized steel with a Raptor-inspired style
- Length 87 in, with mounting brackets included
- Available with or without four drop-down steps
- Textured powder coat finish, available in two finishes
- Vehicle fitment not listed; confirm your year, model and trim
SKU: ORP69404787PC -
-
Power Running Board
AMP PowerStep Running Boards – 76139-01A
- Designed for a 2016 Dodge Ram; confirm fit for your year, model and trim before ordering.
- AMP-Research PowerStep electric running board, part 76139-01A.
- Integrated LED light system, standard.
- Rated 600 lb per side; 5-year/60,000-mile warranty.
SKU: AMP76139-01A -
Running Board
Go Rhino RB10 Running Board Kit (Bedliner Coating) – 63450673T
- Go Rhino RB10 bedliner coating running board kit, part 63450673T
- Raptor-style design for the Jeep Wrangler JL four-door
- Textured black bedliner coating finish
- No-drill installation with mounting brackets included
SKU: ORP63450673T -
Power Running Board
AMP PowerStep Plug and Play Running Boards AMP76235-01A (Black) – 76235-01A
- Fits 2017 Ford Super Duty F-250, F-350 and F-450, all models
- Plug and play power running boards, black, cab length
- Integrated LED lights, 600 lb load capacity each side
- 5-year/60,000-mile warranty
SKU: AMP76235-01A -
Running Board
Go Rhino RB20 Running Board Kit (Black Powder Coat) – 69450673PC
- Go Rhino RB20 black powder coat running board kit, part 69450673PC
- Raptor-inspired design, cab length, for the Jeep Wrangler JL four-door
- Galvanized steel with mounting brackets included
- 5-year limited warranty
SKU: ORP69450673PC -
Running Board
Go Rhino RB10 Running Board Kit (Black Powder Coat) – 63450673PC
- Go Rhino RB10 black powder coat running board kit, part 63450673PC
- Raptor-style design for the Jeep Wrangler JL four-door
- No-drill installation with mounting brackets included
- Pair of boards made from 16-gauge zinc coated steel
SKU: ORP63450673PC -
Power Running Board
AMP PowerStep Running Boards (Black) – 75141-01A
- Named fitment: 2010-newer Raptor; no make, model line or trim is given beyond that note.
- AMP-Research PowerStep electric running board, black, part 75141-01A.
- Rated 600 lb per side, with integrated LED lighting.
- UPC 815410010361; 5-year/60,000-mile warranty.
SKU: AMP75141-01A -
Power Running Board
AMP PowerStep Running Boards (Black) – 75105-01A
- AMP Research PowerStep part 75105-01A, black power running board
- Standard integrated LED light system
- Stainless-steel pivot pins with self-lubricating bushings
- 600 lb load capacity on each side
- Match your truck’s year, model and trim before ordering.
SKU: AMP75105-01A -
Power Running Board
AMP PowerStep Running Boards (Black) – 75110-01A
- AMP Research PowerStep part 75110-01A, black automatic power running board
- Integrated LED light system, standard
- 600 lb load capacity on each side
- Zero-maintenance pivot pins and textured powder coat finish
- Confirm fitment for your vehicle’s year, model and trim before choosing this part.
SKU: AMP75110-01A
Types of side steps
Round nerf bars are tubes, usually 3 inches in diameter, with step pads along the length. Running boards are flat, wide platforms that give more foot room and more coverage against road spray. Step systems such as drop-style or hoop designs place compact steps at the door openings only. Rock sliders with steps use heavier tubing and frame-level mounting for trail protection, and electric steps deploy when a door opens and retract when it closes.
How to choose
Start with how the truck is used. Daily drivers and family vehicles usually benefit from a wide, grippy surface. Trail rigs need clearance, so a tucked-in profile or a slider that sits above the rocker may suit better than a low-hanging board. Sizing details to compare:
- Length: cab length, crew cab, wheel-to-wheel (covering the bed side too) or step-only layouts.
- Finish: gloss black, textured black, powder coat or stainless steel. Textured coatings hide scuffs better than gloss.
- Step surface: cleated, perforated or rubber pads. Look for a surface that drains water and sheds mud.
- Mounting: many listings are described as no-drill or direct fit, using factory holes or existing frame points. Others require drilling.
Fitment and ground clearance
Side steps are vehicle specific. Cab configuration, bed length, door count and sometimes trim level change the bracket design and overall length, so confirm fitment for your exact year, make, model and cab style before choosing a part number. Check the manufacturer's listed mounting points and whether the kit includes brackets.
Consider ground clearance and departure geometry too. A board that hangs low can catch on rocks, ledges and snow ridges, which can bend brackets or dent the body. Steps designed for lifted vehicles may sit higher and use taller brackets.
Installation notes
Most bolt-on kits can be installed with ordinary hand tools in an afternoon, and a helper makes alignment easier. Leave bolts finger tight until every bracket is in place, then tighten to the torque values in the instructions. Rock sliders and any step that mounts to the frame or body structure carry real load, so have a qualified shop do the work if you are unsure. Recheck fasteners after the first few hundred miles and after trail use.
Electric steps also require wiring and a connection to the door switch circuit. Read the instructions closely, or use a shop for the electrical hookup.
Care
Rinse off salt and mud, especially around the brackets, and touch up chips in powder coat to prevent rust. Stainless pieces still benefit from an occasional wipe-down.
Measuring and avoiding mistakes
Before choosing a length, look at your door openings and the distance between wheel wells. Cab-length steps end near the rear of the cab, while longer styles continue behind the rear door. If you tow or carry loads, check that the rear end of the step does not interfere with a trailer hitch, mud flaps or bed side access.
- Do not stack lifts and low steps. After adding a lift or larger tires, the step height changes. A step that suited stock height may now sit too low to clear obstacles, or too far down to be useful.
- Check weight ratings. Steps are meant to carry a person, not to hold up a vehicle. Never use a side step as a jacking point or a recovery anchor, unless the manufacturer says it is designed to be one.
- Look for drainage. Solid surfaces that collect water freeze in winter and collect mud in spring. Cleats or perforations help shed it.
- Pick the finish for your climate. Road salt attacks poorly coated steel, so intact powder coat or stainless matters.
Pairing steps with matching mud flaps, fender flares or bed rails can make the look consistent, though each part should be confirmed for fit separately.
Related guides
- Rocker Knockers vs Rock Sliders: Guarding a Jeep’s Rockers
Popular Side Steps & Running Boards brands
- N-Fab (134)
- AMP-Research (112)
- Smittybilt (106)
- Go Rhino (73)
- Lund (47)
- Westin (44)
- Aries Offroad (38)
- Dee-Zee (26)
- Rock Slide Engineering (20)
- Bestop (17)
- Rampage (17)
- Carr (11)
Shop Side Steps & Running Boards by type
- Nerf Bars & Steps (389)
- Power Running Board (109)
- Running Board (57)
- Rock Sliders (56)
- Running Board Mount Kit (29)
- Running Boards (29)
- Electric Steps & Running Boards (28)
- Trailer Hitch Step (8)
- Rocker Panel Guard Side Step (3)
- Truck Step Pad Hardware (3)
- Running Board Light Kit (2)
- Running Board Light Cover (2)
- Running Board Extension Arm (1)
- Truck Step Mounting Kit (1)
Side Steps & Running Boards FAQ
What is the difference between nerf bars and running boards?
Nerf bars are narrow tubes with step pads. Running boards are wider, flatter platforms that give more foot room and cover more of the rocker area. Nerf bars look sportier and weigh less, while running boards are easier to step onto in dress shoes.
Will side steps fit my truck without drilling?
Many are listed as direct fit or no-drill and use factory holes or frame points, but this depends on the vehicle and the kit. Check the product details and confirm fitment for your exact year, make, model and cab style.
Can I use side steps off-road?
Light-duty steps can be damaged by rocks. For trail use, look at rock sliders or heavier steps that mount to the frame, and consider ground clearance. Follow the manufacturer's rating for how much load the step can hold.
How long should the steps be?
Cab length covers the door openings, and wheel-to-wheel styles run from the front wheel well to the rear wheel well, covering the bed side on trucks. Pick based on look, protection and how much clearance you want at the ends.












