Overview
The Go Rhino RB10 Running Board Kit, part number 63450673PC, is a black powder coat running board kit for the Jeep Wrangler JL four-door, 2018 to current model years. It uses a Raptor-style design.
The boards protect your paint from flying stones and gravel and give a wide, full-length step for entry to the front or back doors. They are built from 16-gauge zinc coated steel with a durable black textured finish for corrosion, impact and abrasion resistance.
Key features
- Raptor-style running board design
- 16-gauge zinc coated steel construction
- Black textured powder coat finish
- Protects the rocker panel and lower door area from rocks and mud
- Wide, full-length step for front and back doors
- Mounting brackets included and no-drill installation
Caring for running boards
Running boards sit low on the rocker, so they collect mud, sand and road salt more than most body panels. Rinse them after off-road trips and dry the brackets to slow corrosion at the mounting points. Inspect the powder coat for chips, and touch up any bare spots promptly so the zinc coated steel underneath stays protected.
Check the brackets and fasteners after the first few drives, and again after rough trail use. Loose bolts can let a board shift or rattle. Keep the top surface clear of gravel that could scratch the finish, and watch the lower edge for ground contact on steep approaches or uneven terrain.
- Rinse after mud and trail use
- Check bracket bolts after rough drives
- Touch up chips on the powder coat
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 63450673PC |
| UPC | 887753502292 |
| Material | 16-gauge zinc coated steel |
| Finish | Black textured powder coat |
| Length | Cab |
| Quantity | Pair |
| Mounting | Brackets included; no-drill |
Vehicle fitment
It is built for the Jeep Wrangler JL four-door from 2018 to current model years. Confirm your vehicle’s year, model and trim before ordering.
Two-door Wrangler JL models and earlier Wrangler generations, including the JK, are not covered by this statement. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is no-drill and includes mounting brackets. Check bracket fit and clearance on your Wrangler before the boards are fully tightened.
What’s included
A pair of Raptor-style running boards with mounting brackets.
