Overview
The AMP-Research PowerStep 75141-01A is a black power running board tied to the 2010-newer Raptor. The step extends when the door opens and retracts under the body when the door closes, which keeps the board out of the way on the road.
The retracted position improves ground clearance and appearance, and the boards are rated at 600 lb per side with a 5-year/60,000-mile warranty.
Key features
- Powered deployment on door open, with automatic stowing at door close.
- Lighting: integrated LED system, standard.
- Die-cast linkage in high-strength aluminum alloy.
- Anodized body and Teflon treatment, rated military-spec against corrosion.
- Zero-maintenance stainless pivot pins running in self-lubricating bushings.
- Textured powder coat for a firmer grip underfoot.
- Stainless-steel trim offered as an upgrade.
Wiring and trail use
Electric running boards are part of the truck’s wiring, so they add a load and a connection point that a fixed step does not have. Check that the harness is secured away from heat, moving suspension parts, and sharp edges. A loose ground or chafed wire is more likely to cause trouble than the motor itself.
On the trail, the retracted position matters most. Keep an eye on clearance for approach and departure angles, and avoid stepping on the board when it is not fully deployed. Heavy mud can stop movement, so clean the pivot area often. If the steps hesitate, have the electrical connections checked before assuming a mechanical failure.
- Check harness clips every few months
- Clean pivot pins after mud or salt exposure
- Keep the door switch area free of debris
Specifications
| Brand | AMP-Research |
|---|---|
| Part number | 75141-01A |
| UPC | 815410010361 |
| Finish | Black, textured powder coat, anodized with Teflon treatment |
| Load capacity | 600 lb per side |
| Lighting | Integrated LED, standard |
| Warranty | 5-year/60,000-mile |
| Origin | Designed and made in the USA |
| Trim option | Stainless steel, optional |
Vehicle fitment
This board is for the 2010-newer Raptor. No make, model line or trim is tied to it, so match your truck’s year, model and trim before buying.
Trucks from before 2010 are outside the stated range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Powered steps with integrated LED lighting need wiring for the motor and lights as well as mounting. Follow the wiring and mounting steps in the written instructions for both.
What’s included
The running boards and their integrated LED light system are included. Check the package contents against your installation before starting, especially mounting hardware and wiring. Stainless-steel trim is an optional upgrade.












