Overview
The Crown Automotive oxygen sensor (part number 5149171AA) is a factory-style replacement for the downstream left position on the vehicles listed below. Downstream means the sensor sits after the catalytic converter, where it checks the converter’s output.
Crown Automotive has supplied replacement parts for Jeep vehicles for more than 50 years, with over 8,000 part numbers including factory-discontinued items. This sensor fits Dodge, Jeep and Ram vehicles from 2011 to 2019.
Key features
- Factory-style replacement oxygen sensor
- Downstream left position, after the catalytic converter
- Direct fit for the vehicles in the list below
- Crown Automotive part number 5149171AA
Replacing a downstream sensor
A downstream oxygen sensor sits after the catalytic converter and reports how well the converter is working. Its readings are usually steadier than the upstream sensor’s, so a fault here often points to the converter or to a sensor that has aged. Exhaust leaks ahead of the sensor can produce false readings, so it is worth checking the exhaust system first.
When fitting a new sensor, use the correct thread and connector for the vehicle, and keep the wiring clear of the exhaust. Anti-seize on the threads helps with later removal, though sensors with a coated tip may not need it. After replacement, clear any stored codes and confirm the readings settle. Replacing the sensor is simpler than repairing damaged wiring, which can cause the same symptoms.
- Check engine light after a sensor fault
- Exhaust leaks ahead of the sensor
- Damaged or heat-stressed wiring
- Codes to clear after fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5149171AA |
| Type | Oxygen sensor |
| Position | Downstream left |
| Fitment type | Direct fit |
Vehicle fitment
It fits the following vehicles: 2012–2018 Dodge Durango; 2011–2019 Dodge Journey; 2018 and 2014–2017 Jeep Cherokee (KL); 2016 Jeep Cherokee (XL); 2011–2017 Jeep Compass; 2018 and 2012–2017 Jeep Grand Cherokee (WK); 2011–2017 Jeep Patriot; 2012–2018 Jeep Wrangler (JK); 2012–2018 Ram 1500 and Ram 2500; and 2013–2018 Ram 3500.
Close vehicles not on this list include the Jeep Cherokee (XJ) and the Jeep Wrangler (TJ). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the sensor in the downstream left position, after the catalytic converter. Wrong placement will give readings that do not match the converter’s condition, so check the position on your vehicle before fitting it.
What’s included
The product is one oxygen sensor. No wiring harness or other parts are described.









