Overview
The Rugged Ridge RUG11007.01 is a stainless steel mirror arm and bracket for the driver side of classic Jeep CJ models. It is a replica of the factory CJ style, made to keep the stock appearance when worn mirror components are replaced.
It is set for the left side only. It fits 1959-1966 CJ3, 1959-1983 CJ5, 1959-1975 CJ6, 1976-1986 CJ7, 1981-1985 Scrambler and 1958 Willys CJ-3, CJ-5 and CJ-6 models.
Key features
- Stainless steel construction
- Driver side (left) only
- Replica of the factory CJ style
- Includes all necessary hardware
Caring for stainless parts
Stainless steel resists rust well, but it can still show water spots, road grime and fingerprints. Wash the arm with mild soap and water, rinse it, and dry it so minerals do not dry on the surface. A light polish with a stainless cleaner keeps the finish bright. Avoid steel wool, which can leave fine scratches that trap dirt.
Because the arm is a replica of the factory CJ style, it works best when the bracket seats evenly against the windshield hinge. Check the bolts after the first few drives, since loose fasteners let the arm move. If the mirror head vibrates, inspect the arm for stress marks before blaming the mirror head.
- Wash with mild soap and dry thoroughly
- Polish lightly with a stainless cleaner
- Check bolts after the first few drives
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG11007.01 |
| Material | Stainless steel |
| Position | Left (driver side) |
| Included | Arm and bracket with all necessary hardware |
| Fitment type | Direct fit |
Vehicle fitment
It fits CJ3 from 1959 to 1966, CJ5 from 1959 to 1983, CJ6 from 1959 to 1975, CJ7 from 1976 to 1986, Scrambler from 1981 to 1985, and 1958 Willys CJ-3, CJ-5 and CJ-6 models.
Wrangler YJ, TJ and JK models are not part of this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One stainless steel driver side arm and bracket, with all necessary hardware.
Not included: no mirror head is described with this arm.










