Overview
The Omix-Ada tail light nut, part number OAI12410.02, is a hex nut with an M6x1.00 thread. It is made for use with tail, stop, turn signal and side marker lights on Jeep vehicles.
The nut fits the 1984–2001 Jeep Cherokee (XJ), the 1993–1998 Jeep Grand Cherokee (ZJ), the 2005–2010 Jeep Grand Cherokee (WK) and the 2007–2018 Jeep Wrangler (JK).
Key features
- Hex head design
- M6x1.00 thread size
- Designed for tail, stop, turn signal and side marker lights
- Direct Fit designation from Omix-Ada
Thread care and tightening
A tail light nut holds a lamp to a stud or post that sits in a body panel. Because the lamp is exposed to road spray and temperature swings, the threads can corrode and seize. Clean the stud with a wire brush before fitting the nut, and check that the thread runs freely by hand before tightening.
Snug the nut rather than forcing it, since an overtightened nut can crack the lamp housing or strip the stud. A worn or oversized mounting hole lets the nut work loose over time, so look for play in the lamp after installation. Replace a damaged stud or nut instead of cranking down on an old one.
- Clean the stud threads before fitting
- Start the nut by hand
- Snug, do not overtighten
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI12410.02 |
| Thread size | M6x1.00 |
| Head style | Hex |
| Use | Tail, stop, turn signal and side marker light |
| Fitment type | Direct Fit |
Vehicle fitment
It fits Cherokee XJ (1984–2001), Grand Cherokee ZJ (1993–1998), Grand Cherokee WK (2005–2010) and Wrangler JK (2007–2018) models.
Models such as the Wrangler YJ and TJ are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Count the nuts in your package and check them against your installation before starting.









