Overview
The Be Cool BEC62242 is an aluminum replacement radiator, a two-core conversion unit for 1987–1995 Jeep Wrangler YJ and 1997–2003 Jeep Wrangler TJ models with 4 or 6 cylinder engines and automatic transmissions. It is designed for high-horsepower motors, trailer towing, back-country rock crawling and stock vehicles that run in extremely high temperatures, and it provides more efficient cooling.
Its tanks and brackets are hand built from .080 inch wall alloy and fully pressure tested. The radiator works with all major brands of anti-freeze. It weighs 40% less than original equipment and is designed to outlast original equipment units.
Key features
- Aluminum tanks and brackets, hand built from .080 inch wall alloy
- Each unit is fully pressure tested
- Two-core conversion design
- Cast filler necks, petcocks and fittings included
- Compatible with all major brands of anti-freeze
- Claimed to weigh 40% less than original equipment
- Handcrafted in the USA
Cooling upgrades and installation checks
A conversion radiator with more core area can carry more heat than a stock unit, which matters when the vehicle works hard in heat, towing or slow climbs. Fit the radiator with the same mounting points and inlet and outlet positions as the original, and check that the fan shroud clears the new core before running the engine.
Flush the cooling system before fitting and inspect the hoses, clamps and water pump for wear. Use the anti-freeze mix suited to your engine and climate, and confirm the thermostat opens at the correct temperature. Top off the system, run the engine to temperature and check every joint for leaks.
Recheck the clamps after a few heat cycles, since new hose connections can settle as the system warms and cools.
- Check fan shroud clearance before running the engine
- Inspect hoses and clamps during the flush
- Recheck clamps after the first few heat cycles
Specifications
| Brand | Be Cool |
|---|---|
| Part number | BEC62242 |
| Material | Aluminum |
| Number of cores | Two |
| Type | Conversion |
| Fitment type | Direct fit |
| Tank and bracket wall thickness | .080 inch alloy |
| Engine | 4 or 6 cylinder |
| Transmission | Automatic |
| Weight | 40% less than original equipment |
| Origin | Handcrafted in the USA |
Vehicle fitment
The manufacturer fitment list covers the 1997–2003 Jeep Wrangler (TJ), including Rubicon, SE, Sahara, Sport and X trims, and the 1987–1995 Jeep Wrangler (YJ), including Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The list does not include the LJ or JK Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Each unit comes with cast filler necks, petcocks and fittings.









